|
Title: EDC15VM, 29F800BT which tool can do recovery? Post by: nbdiy on July 19, 2014, 10:42:34 AM Hallo, I´ve a problem, with a bricked Ecu (wasn´t my mystake, the owner turned the ignition off):
After the writing interrupt I desolderd the Flash an my willem stops at 50%, and I don´t know why... I got the GQ3X with Psop44 Adapter, maybe someone has a hint? I didn´t had to use it often in the past, but there weren´t been any problems... I think that the willem is broken maybe and now I need a other solution to recover the Ecu, can anyone tell me a tool that would work? I had a 1260 for most recoverys it worked, but it was stolen last week... Now I have here MPPS, Galletto 2 Kessv2 (only clones).. Tried the Kess Recovery but no chance (do I have to pay attention for something?)... Title: Re: EDC15VM, 29F800BT which tool can do recovery? Post by: ddillenger on July 19, 2014, 11:49:57 AM You sure it's not a 400 chip.....
50 percent and all. Title: Re: EDC15VM, 29F800BT which tool can do recovery? Post by: nbdiy on July 19, 2014, 12:21:52 PM No was 800BT...
Managed it now with Mpps in Generic Boot Mode... Tried this times before on other Ecu´s and never worked, and here first try: Sucess... Now the only question which is Left is why the Willem only wrote 50%, I think I´ll ask the distributor... Title: Re: Re: EDC15VM, 29F800BT which tool can do recovery? Post by: viski_b on July 19, 2014, 11:46:06 PM Whas it 2.5? I had sucess getting them alive with kess v1 in slow mode when they failed in write. btw I always writte them in recovery mode with mpps.
Title: Re: Re: EDC15VM, 29F800BT which tool can do recovery? Post by: nbdiy on July 21, 2014, 02:53:05 AM Whas it 2.5? I had sucess getting them alive with kess v1 in slow mode when they failed in write. btw I always writte them in recovery mode with mpps. Do you mean 2.5tdi Engine? Then yes, it was 163hp... If you mean hardware of the Ecu, then I dont know exactly, it was a 8E0 907 401 M... I made best experience with good old 1260, it has never Failed on this Ecu´s over Obd to me, normally I need no Bootmode then (but this was stolen)... Without Bootmode: On V6tdi´s 1260 works great, on 1.9tdi Mpps, in my experience... Why it is like this? I don´t know... But in most cases the Mpps is the better choice, it would have done this Ecu over obd, if he hadn´t pulled the Ignition off, I think, but didn´t gave it a try... |