NefMoto

Ecu Number i have is 4B0906018 DQ 2005 Passat AWM Me7.5

I have 90 Corrado 1.8t Aeb swaped had Me 3.8 wired in running had issues with turbos so i put td04 t/3 on it. I knew there weren't many options on  me 3.8 tunning wise so i pulled 2005 passat AWM ecu pedal harness and related sensors, wired in ecu then i came on here read and read got bench setup and flashed in bootmode 95040 file Immo defeat i saved my Eprom bin, car fire right up. As am learning more and more everyday i got me tuner pro nef's software i read my flashed ecu and saved it, as i have been looking for xdf file so i can look at some maps and go slow i couldnt find one for my ecu as its rare. So i ran across that i could convert to
4B0906018D and such to 06A906032MJ and so forth, so i found this file here


1.8T 180HP 06A906032HN

http://nefariousmotorsports.com/forum/index.php?topic=573.0title=

I ran checksum and all was good so i flashed it with nefmoto and everything went good and smooth 100% she was done. and now LOL i cant connect to VAG nor NEFMOTO, i powered ecu down i will wait hour or so see what happeneds if nothing i will boot flash my old bin files and go from there..

What do you guys think might have went wrong here is there such thing as different ecu number reflash i just wanted something more available but like i said i backed everything up.. as i just got into ME7.5 ecu altering but i do have computer knowledge to get me out of sticky situations

Thanks Hopefully i get this thing good :-)

i let the power ecu off for couple of hours still nothing i then boot flashed my eeprom that was successful. I am using KWP2000 cable and cant flash over my file bin in boot mode  i am guessing for this i will need to buy galleto..???

Any ideas??

That file is not compatible with that ecu. You need to bootflash it with galletto to recover. You can use your nefmoto cable, read the galletto sticky.

Yeah i was reading it just few minutes ago where i have to update serial in cable software it is ftdi... i can take obd2 picture inside and i will post in here i already installed galleto 1260 just have to follow sticky to get the cable to read ... i will post picture and information once i give it a go here in little bit

Once i change serial over do i have to change each time i try bootflashing eeprom vcds or should all be functional and do you have any idea of top of your head which mainstream ecu flash i could use other than mine that has damos ,xdf ...

Change the serial of the cable with mprog. That will make the cable compatible with galletto, as well as everything it previously worked with.

Yeah i gotcha i dug into it opened up my obd i have ft232bm ftdi i belive its not writable... i will either order galleto or see if my dads obd2 scanner has ft232 chip writable thanks alot man i read through alot of your stuff on the forum you are very inteligent and very helpfull thanks for taking your time to help us all :-)

That is correct, the BM chipset is not supported. It works with nefmoto, but not galletto.

Waiting on Galletto 1260 now and i will go from there :-) untill then lots of reading. :-)

My 1.8t AEB raddo swap ...

(http://i65.photobucket.com/albums/h236/spile09/Mobile%20Uploads/0706141716a_zps3dc83c79.jpg)

Here is my Original BIN of ecu 4B0906018DQ I read before i flashed i tried running me7check with no success could some one run it for me if they get a chance

Got the galleto in today reflashed and then immo defeated car fired up no problems... i just have to keep reading maybe i come accross a file that could be used on this ecu with xdf source if not i will have to translate these maps

Does any one know which ecu bin might work or that i could try??

You can flash 8E0909518AK to this ecu. I posted the file and xdf somewhere.

Alright i will look for it ... thank you buddy. I will post if i find it and flash it :-)

http://nefariousmotorsports.com/forum/index.php?topic=5770.0

Thats the only one i found might be worth some while as you hellped this gentleman define some of the maps, i searched and searched for your post could not locate it but this might be enough to get me going i will give it a go and define more as i go...  first i will flash then go from there if you or anyone else runs accross your post please let me know if its not too much trouble...

what are you asking for a def file for the ak?
here

Yeah thats it thanks man.. yeah i was just looking for bin that will work for the ecu i have that already has some maps defined and Mr.DDillinger said AK file shall do it since the ecu i got here there is not much info on it.. am reading as much as i can but iv been working like crazy 60-70 hours a week and plus school, little man thats 7months... thats why i just needed little head start so i can get the raddo on the road :-)  i just need to adjust the injectors cat and rear 02 delete and vvt delete since i am running aeb .. enough to get me on the road for now