|
Title: hello I'm a first time Audi flasher.... want to know what I need to know before Post by: ryukenakuma on August 05, 2014, 07:07:31 AM I have a 2001 2.7t a6 with a k ecu 6 speed manual.. I been tuning Honda's, Nissan,mitsubishis abd Subaru for 15 years on open source..... but I had to solder prongs to tune the ecu.... never did one over flash... any help would be appreciated.... I have the gelleto master box and cable abd another generic cable if that doesn't work... I just want to run 20 or so psi..... Don't care much about the motor...just a fun car... I have down pipes, intake, 6 puck clutch...
Title: Re: hello I'm a first time Audi flasher.... want to know what I need to know before Post by: ddillenger on August 05, 2014, 07:09:03 AM I have a 2001 2.7t a6 with a k ecu 6 speed manual.. I been tuning Honda's, Nissan,mitsubishis abd Subaru for 15 years on open source..... but I had to solder prongs to tune the ecu.... never did one over flash... any help would be appreciated.... I have the gelleto master box and cable abd another generic cable if that doesn't work... I just want to run 20 or so psi..... Don't care much about the motor...just a fun car... I have down pipes, intake, 6 puck clutch... Read this thread: http://nefariousmotorsports.com/forum/index.php?topic=6490.0 Post any questions you have there. |