|
Title: System not okay with new cluster Post by: saschwatch on August 07, 2014, 03:27:22 AM I've followed all the instructions to the letter, and I always get system not ok when entering the skc from the original (after logging in etc) on a cluster swap. Part numbers are identical aside from the last letter, and both are petrol. Also the instrument soft coding won't update.
Attached is the new cluster's eeprom, I can get the old, or I have all the immo id/skc info if someone can help. I greatly appreciate anything! Title: Re: System not okay with new cluster Post by: turboat on August 07, 2014, 04:27:03 AM Post up your ecu eeprom (use argdub's tool to pull it from the ECU) and I should be able to pair your new cluster to it.
Title: Re: System not okay with new cluster Post by: saschwatch on August 07, 2014, 04:27:34 AM I went ahead and got the original cluster's eeprom dump here as well if someone can work some magic for me.
Edit: Saw your reply just now, I think this is what you need Title: Re: System not okay with new cluster Post by: saschwatch on August 07, 2014, 06:10:01 AM Also any other help is appreciated
Title: Re: System not okay with new cluster Post by: turboat on August 07, 2014, 06:23:00 AM I think the stock bin you have posted is corrupt, my tool is showing its only 897bytes.
What car is this? Immo2 or Immo3? Title: Re: System not okay with new cluster Post by: saschwatch on August 07, 2014, 06:40:09 AM It's Immo 3, I pulled it straight off myself, but I can double check.
Title: Re: System not okay with new cluster Post by: turboat on August 07, 2014, 06:49:29 AM pull it again, or pull the ecu eeprom (use argdubs tool).
Title: Re: System not okay with new cluster Post by: saschwatch on August 07, 2014, 08:06:15 AM Yes, I've just verified that is correct. Apparently Bosch clusters have a much smaller eeprom than VDO
Title: Re: System not okay with new cluster Post by: turboat on August 07, 2014, 08:09:42 AM Cant help out the, sorry. Hopefully someone else will be able to.
Title: Re: System not okay with new cluster Post by: saschwatch on August 07, 2014, 08:27:01 AM Thanks for trying! Guess I'll have to be patient
Title: Re: System not okay with new cluster Post by: ddillenger on August 07, 2014, 10:20:52 AM Post the original ecu eeprom.
|