|
Title: cheap bench flashing harness Post by: fknbrkn on August 14, 2014, 12:01:28 PM found this kit on aliexpress
arrived yesterday need some plastic grinding to fit and solder another power wire to pin #121. because i have a spare +12 voltmeter im also installing it into connector - it indicates power up and voltage. and now it works like a charm. http://www.aliexpress.com/item/High-quality-VAG-81pin-ECU-OBD-F-DC-Cable-81-pin-obd-female-to-DC-cable/1747129216.html?promotionVersion=1 http://ru.aliexpress.com/item/1pcs-DC-3-3V-17V-Red-Tube-Volt-Voltage-Meter-Display-Digital-Voltmeter-wholesale-Dropshipping/792792225.html?promotionVersion=1 Title: Re: cheap bench flashing harness Post by: nyet on August 14, 2014, 01:01:27 PM nice find!
Title: Re: Post by: Terror_Flynn on August 14, 2014, 01:47:44 PM Just what I need! I have scavenged the local junkyard for connectors to make my own harness, but all the OBD connectors were all gone.
So I am gonna buy that harness in the link. Title: Re: cheap bench flashing harness Post by: KmosK04 on September 28, 2014, 05:54:52 AM Can you explain please how did you put the 121 pin wire and the voltmeter in the cable? I just bought it and I want to make it like this. Also what are you use for power supply? Thanks
Title: Re: cheap bench flashing harness Post by: fknbrkn on September 28, 2014, 10:51:23 AM pin #121 is simple +12v wire. so just connect it to power red wire
voltmeter also connecting to red and black wires. im using some russian 12v power supply (actually its 13v output). i think its for security systems. so you can use any with 12..14v output |