|
Title: Ecu change over Post by: Bi-turbo on August 15, 2014, 02:31:20 AM 551C 512kb now, can i stick a 551M/D 1024kb etc on there?
Title: Re: Ecu change over Post by: ddillenger on August 15, 2014, 11:29:05 AM 551C 512kb now, can i stick a 551M/D 1024kb etc on there? You must use the entire ecu from a 551M/D in order to run the 1mb file. Title: Re: Ecu change over Post by: nyet on August 15, 2014, 11:38:09 AM 551C 512kb now, can i stick a 551M/D 1024kb etc on there? You need an ECU with a 1MB flash to load a 1MB image onto it. I assume all the address lines are there, in theory, you can solder a 1MB flash onto a C ECU. DD would know for sure if that is possible ;) Title: Re: Ecu change over Post by: Bi-turbo on August 15, 2014, 12:32:05 PM Sorry,
I mean can I take off the 551C ecu and fit a D or M box etc. Will the car work ok as in having a facelift ecu on a pre facelift. Title: Re: Ecu change over Post by: nyet on August 15, 2014, 12:55:09 PM MAF, coding, etc.
Title: Re: Ecu change over Post by: Bi-turbo on August 15, 2014, 01:27:15 PM Title: Re: Ecu change over Post by: _nameless on August 19, 2014, 12:44:24 PM Hitachi vs bosch maf coding esp non esp 8)
Title: Re: Ecu change over Post by: Bi-turbo on August 19, 2014, 01:15:49 PM So I can run a D box for example but code it right for the car, thanks
Title: Re: Ecu change over Post by: nyet on August 19, 2014, 01:37:54 PM So I can run a D box for example but code it right for the car, thanks MAF difference has to be done by modifing MLHFM and MLOFS, can't just be done via coding. |