NefMoto

Technical => Tuning => Topic started by: AudiMan85 on August 16, 2014, 04:52:56 PM



Title: Settings for 077905115 [T] - *NEW* STYLE Push on Coils
Post by: AudiMan85 on August 16, 2014, 04:52:56 PM
Hey, I bought used 2004 S4 coils 077905115 "H" which slowly started to blow on my on higher boost. So read up, says they and defects. I used the the dwell time and coil settings from the 2.0TFSI spreadsheets. The the coils were blowing cylinder by cylinder not, on the same cylinder.

So now I have all new swapped out to 077905115 "T" on my 2.7T with lifetime warranty on them and before I go out and start pushing the car, I need to know if its ok to run the 2.0 TFSI coil settings on these coils? I'm told they are used in the 2004 to 2009 Audi S4/RS4 4.2L from what I can tell on www.genuineaudiparts.com

Could someone let me know if I using the FSI settings might have blew the coils??

If not I'll just go back to factory coil settings, which I was told would make the coils burning out, but then again who cares as I got lifetime replacement for $20 a coil.

LMK,
Thanks guys