NefMoto

Technical => Tuning => Topic started by: Aguirre on August 27, 2014, 12:23:02 PM



Title: BMW e36 MS41.0 TPS enrichment
Post by: Aguirre on August 27, 2014, 12:23:02 PM
Hello.
I installed to my E36 m52b30 ITB from S50B30euro.
Everything is almost ok.Remained only the problem of the large plenum and delayed reaction of fuel.
Factory TPS enrichment correction is too small.
Does anyone know the address map "TPS enrichment" in this Ecu?Its Siemens MS41.0
Any suggestions welcome :).


Title: Re: BMW e36 MS41.0 TPS enrichment
Post by: Aguirre on September 06, 2014, 11:09:02 PM
No one can help?
Although some tips when it comes to location maps.

http://www.4shared.com/file/5rhUe3mMce/328_bin.html
My bin file


Title: Re: BMW e36 MS41.0 TPS enrichment
Post by: terminator on September 07, 2014, 09:27:32 AM
11C8 lambda map, lower values for enriching AFR. Not sure it has TPS axis (load instead of TPS as I remember).


Title: Re: BMW e36 MS41.0 TPS enrichment
Post by: Aguirre on September 07, 2014, 01:14:35 PM
11c8 is ignition map when vanos is active.
TPS enrichment will be small map 6x6 or 8x8 i think.
But which it will be  :(.


Title: Re: BMW e36 MS41.0 TPS enrichment
Post by: terminator on September 07, 2014, 04:23:33 PM
Maybe you are right, but I read somewhere its AFR. Anyway this is wrong place for asking about BMW MS41  ;)


Title: Re: BMW e36 MS41.0 TPS enrichment
Post by: ddillenger on September 07, 2014, 04:36:53 PM
Maybe you are right, but I read somewhere its AFR. Anyway this is wrong place for asking about BMW MS41  ;)

No it's not :)