|
Title: A throttlebody question. Post by: Terror_Flynn on August 29, 2014, 05:57:45 AM I have an V8 throttlebody, its DBW.
I read somewhere that the v8 and 2.7t throttlebodys have the same measurements. So what's size is the 2.7t? I ask because I wanna know if I can use the 034 adapter for my v8 throttlebody. Title: Re: A throttlebody question. Post by: ddillenger on August 29, 2014, 12:10:31 PM 2.7t is 70mm
062 RS4/2000 4.2 DBW is 75mm 062A 2001+ 4.2 is 85mm Title: Re: Post by: Terror_Flynn on August 29, 2014, 12:35:49 PM Hmm.. In that case it seems I have an 2001+ v8 throttlebody.
So I need to make an adapterplate because the 034 one is not gonna work. Also, the throttlebody is very overkill with its 85mm, especially on 1.8t even with some major HP mods. I will see what I do with it in the future. Title: Re: A throttlebody question. Post by: Lyonz on August 29, 2014, 02:56:39 PM Hi...
And the throttle body from RS4 TFSI? I have one for my R32 turbo project Title: Re: A throttlebody question. Post by: 10101011 on January 07, 2015, 07:53:57 PM The thottle body from a RS4 is the same as a C5 ZO6. The RS4 T-body is over $800 and the Corvett t-body is under $300. The size is 90mm but you can buy a better and larger from Summit racing ( 100+ mm ).
Putting a 90+mm tbody on a 1.8t would be a waste unless you were able to make 800hp+ |