NefMoto

http://www.nefariousmotorsports.com/forum/index.php?action=dlattach;topic=219.0;attach=216

Is for 2001 1.8t CH box

Hey guys, Im having trouble finding KFZW/KFZW2
I'm right on them, but I can't quite get it:
I found them:
KFZW   1256C      12 by 13
KFZW2 12620       12 by 14?

I was under the impression that they should be the same size? Did I do something wrong? Maybe a line in KFZW2 is 1 to much?
Thanks in advance.

On another note, I came up with:

KFZWOP       1198A;  Y axis 134DE; X axis 16478
KFZWOP2     11A3A; "same                               "
I'm pretty sure the x axis is right, but am unsure as of the y axis. Thanks.

KFZW and KFZW2 are the same size.

Yeah, I figured that out. I appreciate the reply none the less. Thanks Tony.

For KFZWOP, KFZWOP2 you are right about the axes
(unless the fact I normally define X and Y swapped compared to your view).

KFZW at 12548
KFZW2 at 12608
Both are 16x12 (nmot_w x rl_w), axes at 13500 (nmot_W) and 13564 (rl_w)

I wasn't going to ask, but seeing how it wouldn't hurt: How come in the ori.bin in kfzw at the end of the map the value are listed 255, 254 quite a bit. I have not seen this in other files? 8 bit/decimal view of course. This doesn't make sense unless for some reason it doesn't get used and just easier to FF everything in that area? Hope that makes sense.

Hm, I don't see strange values in KFZW/KFZW2 within the CH image when using the
addresses I posted, see the attached TP output.

I don't know how to do screen shots, but I can sure as hell take pictures ;D
Maybe I'm wrong about an offset or something? Everything from what you have is dead on except for where it pulls timing/advances. I had this question awhile ago, maybe you can fill me in. Thanks.

And here it is in 2D; Thanks for taking a look. This has been bothering me in the back of my mind for quite some time, although I didn't feel it mattered much as I don't think I would need to change anything in those areas anyway. This was all taken from KFZW, and KFZWOP looks good to me. I thought maybe it was just my bin, but I read out a chipped bin from another CH box, it looks identical?

Now I understand what you mean.
You have selected the correct address for KFZW and the contents are fine.
And values like 0xFF or 0xFE are also absolutely fine in this map.
You just forgot that the map values are SIGNED bytes, so 0xFF is -1 and
represents -0.75 degrees (not 255 * 0.75 = 191.250 degrees).

Sooo, maybe dumb question but how do I get it to view -0.75 etc.? I honestly thought I was losing my mind. Thank you for your response.

Mark it as signed.

Also, taking pictures of your screen is rather silly. Why not use a screenshot?

I'm not sure how to do a screen shot, and to be honest I've spent so much time reading the wiki and trying to decipher the funktionsrahmen, I haven't cared to research screen shots. It is silly though compared to screen shots lol. Not very professional, but it made the point. And yes as soon as I walked in the door from work I signed it, and it fixed right up. Thanks guys. I'll figure out screen shots before I post another picture...promise.

screenshot - press prnt scrn button, top right of your keyboard.  Then open a program llike paint or word, and press ctrl+v

Rick

Awesome, thank you.

ctrl + alt + prnt scrn will copy just the active window.

Thanks phila dot. I appreciate your input as well.

Just Alt + Prnt Scrn  ;D

I wonder of something else. Is the X and Y 1 bit or 2 bit code?