|
Title: Using MMPS to read/write to a Bosch 3.8.3 Post by: Mo Arif on September 03, 2014, 06:49:22 AM Hi all,
am I correct in thinking that you need some form of OBD2 adaptor to use MPPS to flash a Bosch 3.8.3 ECU? Title: Re: Re: Using MMPS to read/write to a Bosch 3.8.3 Post by: technic on September 03, 2014, 07:16:55 AM Adaper that pulls OBD pin 13 to +12V, or ecu pin 43 to +12
Title: Re: Using MMPS to read/write to a Bosch 3.8.3 Post by: Beaviz on September 03, 2014, 07:17:58 AM AFAIK you can not read it. You should be able to write if you supply 12v to pin 43 on the ECU or pin 13 on the OBD port.
Title: Re: Using MMPS to read/write to a Bosch 3.8.3 Post by: TCSTigersClaw on September 03, 2014, 10:08:32 AM exactly reading only with desoldering :) but no need.
What is your SW number ? You can find an ori here to modify and flash |