|
Title: Cannot find KFZW load axis 4D0907559D Post by: hopsis on September 04, 2014, 12:36:28 AM I have some Audi C5/D2 4.2 projects that have ME7.1 ecus. I've been making an .XDF for that purpose, mostly by help of 4D0907559E.XDF which is ME7.1.1 (courtesy of ddillenger). I cannot however find the load axis used in the KFZW maps in the 4D0907559D bin.
I believe KFZW is at 162E7, Y-axis at 1004C but I cannot find the X-axis. I've found the other ignition maps but they all use the same axis. Title: Re: Cannot find load axis 4D0907559D Post by: ddillenger on September 04, 2014, 12:48:03 AM 143D0 8bit, factor .75x
Title: Re: Cannot find load axis 4D0907559D Post by: hopsis on September 04, 2014, 01:07:10 AM Thank You for a quick reply. Am I doing something wrong here because that address doesn't seem to work right? Pic attached.
Title: Re: Cannot find load axis 4D0907559D Post by: hopsis on September 04, 2014, 01:51:41 AM Scratch that. I forgot to correct the address step from 2 to 1. Now it's working perfect.
Title: Re: Cannot find KFZW load axis 4D0907559D Post by: nakata on September 26, 2014, 01:07:41 PM Any progress? Can you share the xdf file? Thank you.
Title: Re: Cannot find KFZW load axis 4D0907559D Post by: hopsis on September 26, 2014, 01:49:51 PM I've made some progress, I haven't had time to verify that everything is correct. I'm still trying to get rid of a mysterious misfire problem. I have to first get the the car running as it should with stock program, I'll focus on the .xdf more after that.
As it is, I'm not confident that everything is where it should be with the xdf. I'll release it when I've had the chance to test that everything works. If You have something You need right away, I'll try to help. Title: Re: Cannot find KFZW load axis 4D0907559D Post by: vwaudiguy on September 26, 2014, 11:30:36 PM Sorry for the off topic question, but why does that file have 3 timing maps per cam state?
|