|
Title: Gelletto Help, cant read ecu or get data. Post by: fueledpassion109 on June 03, 2011, 10:10:50 PM I have read 100's of threads about galletto and putting my car in boot mode. after 2 days of trying i figured I ask for help.
I have a 2001 WBE Jetta 1.8t removed fuse 11 and 15 I soldered 1k ohm to pin 24-connected to mass, turned ignition to on. waited 5 seconds removed ground, started galletto 1260 tried to get ECU Data but got error Boot mode inactive. ECU: 06A906032 DL BENZIN ME7.5 0003 26SA7257 1159 0122 MOTRONIC 00-12-05 Any thoughts? Title: Re: Gelletto Help, cant read ecu or get data. Post by: vwaudiguy on June 04, 2011, 01:01:30 AM I don't remember anything about using a resistor on pin 24. Did you try straight to ground?
Title: Re: Gelletto Help, cant read ecu or get data. Post by: fueledpassion109 on June 04, 2011, 10:32:16 AM yes, I have tried straight.
Title: Re: Gelletto Help, cant read ecu or get data. Post by: fueledpassion109 on June 04, 2011, 11:00:35 AM so grounded to batt. and now i get a new error... errore ecu data....
Title: Re: Gelletto Help, cant read ecu or get data. Post by: vwaudiguy on June 04, 2011, 02:37:30 PM I usually remove the ecu when doing a boot mode on the 06A ecu's. I don't have any exp doing them while still in the car. Hopefully someone else on here may be able to help.
|