|
Title: TunerPro and editing xdf files... crashing. Post by: Snow Trooper on June 06, 2011, 10:01:16 AM Fixed...
edit you corrupted xdf files with notepad or something similar. use code from other good known xdf files for a similar block you need to view and copy over their parameters. put in the address that is HOPEFULLY right from the previously corrupted xdf. Title: Re: TunerPro and editing xdf files... crashing. Post by: Snow Trooper on June 06, 2011, 10:57:50 AM so I think i have editing the xdf figured out. I had just assumed I counldnt do it in notepad but sure enough I could.
So now I did a few of the things I wanted to try and I feel like my maps specific to the changes look different than others. hmmm... I will report back with real world results. Title: Re: TunerPro and editing xdf files... crashing. Post by: Jason on June 06, 2011, 11:14:54 PM I would email Mark. He is a cool dude and will respond.
Title: Re: TunerPro and editing xdf files... crashing. Post by: nyet on June 06, 2011, 11:46:06 PM Why are you hand editing XDFs? They're not meant to be hand written.
Edit them in tuner pro, or write a program to generate them.. Title: Re: TunerPro and editing xdf files... crashing. Post by: Snow Trooper on June 07, 2011, 09:06:14 AM Nye,
I am mostly editing xdf files as I move code from one type of ecu to another to try and succeed in my single bank quest. Lots of trial and error. But I cannot edit them with tuner pro, anything I do, the first digit I type in any window and bam. Its crashed out. I have been hopefully finding success in editing by hand, or are you saying that i am not going to? I could understand if changing one section of the xdf info would cause others to not communicate with it properly, is this the case? Title: Re: TunerPro and editing xdf files... crashing. Post by: nyet on June 07, 2011, 09:11:16 AM I'm saying if tuner pro is unstable, it isn't going to get more stable if you edit the xdfs by hand..
fix one problem at a time. contact mark and find out why tunerpro is crashing (it shouldn't) Title: Re: TunerPro and editing xdf files... crashing. Post by: Snow Trooper on June 07, 2011, 09:20:10 AM Thus far my changes to xdfs that were sourced from here and around the web have been increasing stability within other aspects of the program, like actual tuning of maps, being ablt to compare bins and so on.
I couldnt even open certain maps/scalars before without it crashing because xdfs were bad or setup wrong. Not the m-box stuff, just more obscure stuff. What i have done is take known good working chunks from something like your m-box xdf and substituted it in for the problematic chunks that i find by hand. Then just change the location to what it was originally and it seems to fix it. I must thank you for having a good xdf to be able to see what things should be formatted like. :) |