|
Title: 2003 Audi TT 1.8T BAM XDF Request 8n0906018h Post by: !nfern0 on September 16, 2014, 08:35:57 AM Hi,
I'm trying to learn something about mapping... Slightly increasing Torque... changing A/F Ratio... "Pedalkennlinie"... Therefore I need the XDF-File for The ECU. I read the .bin file with memory layout 29F800BB, hope that was right? Unfortunately I found nothing on google about the right layout. :'( Maybe I Should open the ECU and take a look on the EEPROM? Attached the original .bin. Thanks a lot. Title: Re: 2003 Audi TT 1.8T BAM XDF Request 8n0906018h Post by: !nfern0 on September 20, 2014, 05:36:33 AM Hi there again!
Can I use the .xdf file which is found here (http://nefariousmotorsports.com/forum/index.php?topic=1611.0title=) with my .bin file? Thank you for your help! Title: Re: 2003 Audi TT 1.8T BAM XDF Request 8n0906018h Post by: neuro on September 29, 2014, 11:05:15 AM Hi there again! Can I use the .xdf file which is found here (http://nefariousmotorsports.com/forum/index.php?topic=1611.0title=) with my .bin file? Thank you for your help! MAP FOUND: KFZWOP 11x16 @ 0x11557 MAP FOUND: KFZWOP2 11x16 @ 0x11607 MAP FOUND: KFZW2 12x16 @ 0x7C162 MAP FOUND: KFMIRL 16x16 @ 0x150CA MAP FOUND: KFMIOP 11x16 @ 0x16616 MAP FOUND: KFLBTS 16x12 @ 0x192A5 MAP FOUND: LAMFA 6x15 @ 0x1C98A MAP FOUND: KFLDIMX 8x16 @ 0x1E200 MAP FOUND: KFLDHBN 8x8 @ 0x1E8F2 MAP FOUND: KFDLULS 8x8 @ 0x1A3B0 MAP FOUND: KFLDRL 10x16 @ 0x1E352 MAP FOUND: LDRXN 16x1 @ 0x1EAD4 MAP FOUND: LDRXNZK 16x1 @ 0x1EB16 MAP FOUND: VMAXNB 1x1 @ 0x1F49A MAP FOUND: VMAXTM 5x1 @ 0x1F4A8 MAP FOUND: VNMX 1x1 @ 0x116C8 MAP FOUND: NMAXDVG 1x8 @ 0x1F478 MAP FOUND: NMAXGA 1x8 @ 0x1F488 MAP FOUND: NMAX 1x1 @ 0x1679A MAP FOUND: NMAXDV 1x1 @ 0x1679C MAP FOUND: NMAXOG 1x1 @ 0x167A2 MAP FOUND: DNMAXH 1x1 @ 0x16794 MAP FOUND: ITNMXH 1x1 @ 0x16798 MAP FOUND: TMOTNMX 1x1 @ 0x1F498 MAP FOUND: TNMXH 1x1 @ 0x167A6 MAP FOUND: CWDLSAHK 1x1 @ 0x186F7 MAP FOUND: CDHSH 1x1 @ 0x1819C MAP FOUND: CDHSHE 1x1 @ 0x1819D MAP FOUND: CDHSHE 1x1 @ 0x1819D MAP FOUND: CDLSH 1x1 @ 0x181AB MAP FOUND: CDSLS 1x1 @ 0x181B0 MAP FOUND: CLAHSH 1x1 @ 0x10751 MAP FOUND: CLAHSH2 1x1 @ 0x10752 MAP FOUND: CLAHSH2 1x1 @ 0x10752 MAP FOUND: CLAHSHE 1x1 @ 0x10753 MAP FOUND: CLAHSHE 1x1 @ 0x10753 MAP FOUND: CLAHSHE 1x1 @ 0x10753 MAP FOUND: CLASLPE 1x1 @ 0x10786 MAP FOUND: CLASLVE 1x1 @ 0x10789 MAP FOUND: CLASLVE 1x1 @ 0x1078C MAP FOUND: KRKTE 1x1 @ 0x1C830 Title: Re: 2003 Audi TT 1.8T BAM XDF Request 8n0906018h Post by: !nfern0 on October 23, 2014, 09:07:46 AM Thank you for your information.
I spent some hours creating the xdf-file. Please find attached. I have two additional questions concerning MLHFM and KRKTE. MLHFM: How do i manage in TunerPro to get the Volt-Axis right? ??? KRKTE: Is this conversion factor right? See screenshot attached. |