|
Title: Flash issues maybe, starting issues...help Post by: Bi-turbo on September 17, 2014, 10:47:06 AM 551D
Done immo off with 95040 tool .bin file off old ecu still 1024kb ecu can't post as it's commercial tune Writes fine with galletto Car fires up for 1 or 2 secs then conks out Any ideas? Title: Re: Flash issues maybe, starting issues...help Post by: armageddon on September 17, 2014, 01:09:50 PM try to flash other 95040.bin with immo off and see if it work.
friend of mine had is ECU "blocked" by an audi dealer, I simple put another 95040.bin on it and it worked Title: Re: Flash issues maybe, starting issues...help Post by: Bi-turbo on September 17, 2014, 01:31:09 PM It already had the immo off but I wrote another to it to be sure.
I did think about weather it needed the throttle body alignment or idle adjustment done with vcds Title: Re: Flash issues maybe, starting issues...help Post by: turboat on September 17, 2014, 03:29:12 PM Odd, sounds a lot like immo stopping the engine. Are there any fault codes?
Title: Re: Flash issues maybe, starting issues...help Post by: Bi-turbo on September 18, 2014, 12:08:29 AM Didnt scan it as i was getting frustrated as i had to walk back and forth from my house to garage to check it on the car 4 times after re-flashing.
I had another issue were on VCDS in engine it wouldnt bring up the ecu number it was just saying THIS-IS which i belive would be THIS-IS-THE-RAM-MEMORY whihc made me think somthing was scrambled? Its a standard chip on the bored so not sure hwo it would scramble anything. Its now not doing that after a reflash but still the start issue Title: Re: Flash issues maybe, starting issues...help Post by: Bi-turbo on September 18, 2014, 01:13:06 AM Just sprung to mind, is 551D ME7.1.1??
I think i has put the immo off bin for 7.5/7.1 on there Title: Re: Flash issues maybe, starting issues...help Post by: turboat on September 18, 2014, 03:12:57 AM That may well be the problem! I always immo off the file I read from the ecu, rather than using a generic one. Post up the ori EEPROM and the immo off one
Title: Re: Flash issues maybe, starting issues...help Post by: Bi-turbo on September 18, 2014, 03:39:50 AM I was goin to but i couldnt get your tool working
Ill try post them up later when im home Title: Re: Flash issues maybe, starting issues...help Post by: turboat on September 18, 2014, 04:08:27 AM What was the issue you had?
Title: Re: Flash issues maybe, starting issues...help Post by: Bi-turbo on September 18, 2014, 05:07:14 AM it wouldnt run, somthing about python?
Title: Re: Flash issues maybe, starting issues...help Post by: turboat on September 18, 2014, 05:08:30 AM Use the version in the .zip, you need all the files in that zip in the same directory as the tool.
Title: Re: Flash issues maybe, starting issues...help Post by: nyet on September 18, 2014, 09:43:28 AM Just sprung to mind, is 551D ME7.1.1?? No http://nyet.org/cars/files/stock/part-numbers.txt |