|
Title: Trying to figure out why my engine load looks like this Post by: Dwynell on September 23, 2014, 09:30:37 AM Hi my name is DWYNELL and i'm in need of a little guidance. The car is a 2003 a4 with 2.7 engine swapped into it. Mods are srm ic, frankenturbo f21,ev14 550cc inj , aero 340 fuel pump,cat-less down pipes,80mm housing with hitachi maf and 3bar map.I have been making adjustments to kfmirl and kfmiop for awhile now trying to understand why load request and corrected look the way they do. If someone could take a look at my log and give me some input on areas where I may need to spend more time fine tuning this file,any help that can be give would be greatly appreciated. Thank you
Title: Re: Trying to figure out why my engine load looks like this Post by: AARDQ on September 23, 2014, 09:41:51 AM Looks to me like this topic covers it since load tracks cam phase:
http://nefariousmotorsports.com/forum/index.php?topic=5598.15 Take a look at s4wiki.com "Cam changeover effect on requested boost" Title: Re: Trying to figure out why my engine load looks like this Post by: phila_dot on September 23, 2014, 09:59:47 AM Your problem is in %LDRLMX.
You should include specified load in the graph as well, but I'm pretty sure that is from intervention. Looks to me like this topic covers it since load tracks cam phase: http://nefariousmotorsports.com/forum/index.php?topic=5598.15 Take a look at s4wiki.com "Cam changeover effect on requested boost" Does not affect desired load. Title: Re: Trying to figure out why my engine load looks like this Post by: nyet on September 23, 2014, 10:11:52 AM Spec load is solid.
|