|
Title: Part throttle Post by: armageddon on October 04, 2014, 02:46:35 AM Hi,
I am using old Tony's satge 3 file with some changes to my setup. I am expering some "jerking" under part throttle until 2500rpm's. Full throttle seems pretty much spot on. What variables should I log to find what's going on with it? OEM K04 turbos Siemens Deka 630cc xs downpipes Stock maf Title: Re: Part throttle Post by: ddillenger on October 04, 2014, 05:42:04 AM Hi, I am using old Tony's satge 3 file with some changes to my setup. I am expering some "jerking" under part throttle until 2500rpm's. Full throttle seems pretty much spot on. What variables should I log to find what's going on with it? OEM K04 turbos Siemens Deka 630cc xs downpipes Stock maf KFMIOP/KFMIRL are an issue in that file. That is where your problem lies. Title: Re: Part throttle Post by: armageddon on October 04, 2014, 10:52:12 AM when looking at it, KFMIOP is stock
Will put stock values on firsts columns of KFMIRL and see if that helps. I had also tried berttos version that as KFMIOP axle rescaled and inverse of KFMIRL, part/full throttle was fine but was getting 17743 engine torque monitor2 thanks Title: Re: Part throttle Post by: armageddon on October 09, 2014, 03:38:20 AM KFMIRL with stock values on 50 and lower columns, cars runs great
thanks ddillenger |