|
Title: 2 step hard cut launch contol/antilag..help... Post by: scoot1043 on October 08, 2014, 01:31:18 PM Hi, Right I would like to add the flame throwing epicness...
right I would like to follow this post but it says I need a different XDF..... http://www.nefariousmotorsports.com/wiki/index.php/Adding_anti-lag_launch_control_and_no-lift_shift Is there one available for my 1.8t AUM engine, 06A906032DR ME7.5 0003 Title: Re: 2 step hard cut launch contol/antilag..help... Post by: armageddon on October 08, 2014, 04:02:49 PM use the script on this thread: http://nefariousmotorsports.com/forum/index.php?topic=3349.0
and then, if you are unhappy with the pre defined settings you can create xdf's parameters using an m-box xdf as reference and the locations that script gives to you Title: Re: 2 step hard cut launch contol/antilag..help... Post by: scoot1043 on October 08, 2014, 10:41:39 PM use the script on this thread: http://nefariousmotorsports.com/forum/index.php?topic=3349.0 and then, if you are unhappy with the pre defined settings you can create xdf's parameters using an m-box xdf as reference and the locations that script gives to you Nice buddy! That shore willl make things easyer... But were can I get Me7info? can someone attach a file? Title: Re: 2 step hard cut launch contol/antilag..help... Post by: armageddon on October 09, 2014, 03:43:09 AM This may help:
http://nefariousmotorsports.com/forum/index.php?topic=1798.0 Title: Re: 2 step hard cut launch contol/antilag..help... Post by: scoot1043 on October 09, 2014, 05:45:18 AM This may help: Thanks! Ok so me7info is the same as me7logger? http://nefariousmotorsports.com/forum/index.php?topic=1798.0 Title: Re: 2 step hard cut launch contol/antilag..help... Post by: adam- on October 09, 2014, 06:56:28 AM Have you searched at all man?
Mine's an AUM, has everything you'll ever want. You really need to be looking into rods for it though, because it will throw one. Change FTOMN to 0, disable the soft launch (I was just playing with it), and ramp up the AL launch to 4500. Your coils will last 5 minutes and then you'll throw a rod. Happy motoring! :) Title: Re: 2 step hard cut launch contol/antilag..help... Post by: scoot1043 on October 09, 2014, 10:14:50 AM Have you searched at all man? Mine's an AUM, has everything you'll ever want. You really need to be looking into rods for it though, because it will throw one. Change FTOMN to 0, disable the soft launch (I was just playing with it), and ramp up the AL launch to 4500. Your coils will last 5 minutes and then you'll throw a rod. Happy motoring! :) Ok, well that is not so enshrining lol... so is AL/ hard cut already on the ecu? im confused.... Title: Re: 2 step hard cut launch contol/antilag..help... Post by: nyet on October 09, 2014, 10:48:57 AM Thanks! Ok so me7info is the same as me7logger? No. Different utility used for a completely different purpose. Ok, well that is not so enshrining lol... so is AL/ hard cut already on the ecu? im confused.... Do you mean right after patching? Title: Re: 2 step hard cut launch contol/antilag..help... Post by: scoot1043 on October 09, 2014, 11:33:12 AM No. Different utility used for a completely different purpose. Do you mean right after patching? Ok, well the thread I was following says I need Me7info.... http://nefariousmotorsports.com/forum/index.php?topic=3349.0 so wear can I get that from? so the patch is required yhes? and then I update the XDF file.... Title: Re: 2 step hard cut launch contol/antilag..help... Post by: nyet on October 09, 2014, 11:46:22 AM Sorry, I misunderstood: Yes, ME7Info comes with ME7Logger.
Title: Re: 2 step hard cut launch contol/antilag..help... Post by: armageddon on October 09, 2014, 01:38:36 PM download me7logger -> use Me7Info to creat your .ecu file -> use the script -> if not happy creat xdf to be able change data...
That thread has 12 pages, if you read them all the information you want is there Title: Re: 2 step hard cut launch contol/antilag..help... Post by: adam- on October 09, 2014, 02:31:24 PM Go find my file.. ::)
|