NefMoto

I attached a file.  This doesn't look right to me.  should the numbers on the left column be in order from least on the top?  any help will be rewarded with good karma.

There is nothing right in that map. Very likely the xdf is for a different binary or there is an error in the xdf.

Attached is KFMIOP from a different binary, just to show what You should be seeing. Don't look at the actual cells as they won't be the same but rather the larger picture.

Please don't enclose screenshots in a word document. Just post the screen shot directly.

that's my first read ever .bin from my 2001 allroad apb 4Z7907551M with a 8d0907551m .xdf

i know how to take a screen shot but how do I post it directly?

4Z7907551M does not share the same addresses as 8D0907551M, so you can't use that xdf. You can however flash your ecu with 8D0907551M .

thank you

ok so I use the 8D0907551M .bin and .xdf files right?  Immobilizer shouldn't be an issue, as I'm disabling it correct?

Correct.

Unless you have a tip, in which case use L (which uses same xdf as M)

Yes, you want 8D0907551L as you're tiptronic. The 551M xdf is still the same however.

thank you all, I just successfully performed my first flash.  I added 20 to all values in ldrxn and disabled SAI.  Boost went up to 12-14.  thinking about adding another 20 across ldrxn next.