|
Title: 4B0906018AA basic maps defined Post by: TijnCU on October 10, 2014, 01:07:38 AM This is my first version, all axis definitions come from a 4B0906018P 352750 map pack. Not every axis has the correct adress linked yet, it I find them I will update attached file.
Title: Re: 4B0906018AA basic maps defined Post by: TijnCU on November 19, 2014, 03:01:41 PM And also in XDF now
UPDATED: MLHFM adress!! and sorted some maps out. Title: Re: 4B0906018AA basic maps defined Post by: rotax on June 21, 2016, 09:08:00 AM I've been searching for a full xdf och damos file for this ECU with no luck.
Has there been any progress on this xdf-file since it was posted earlier in this thread? Please share... Title: Re: 4B0906018AA basic maps defined Post by: TijnCU on June 22, 2016, 03:24:37 AM I have not worked on this ecu anymore, sorry.
Title: Re: 4B0906018AA basic maps defined Post by: mdz on June 22, 2016, 08:41:12 AM Here's my work in progress. First time defining bin so some axis are missing and some maps may be incorrect. Attached original bin also because it has different software version. ::)
Title: Re: 4B0906018AA basic maps defined Post by: rotax on June 22, 2016, 01:22:57 PM Fantastic work!
Anybody had any success converting .kp files to .xdf files? Are these maps your guesses or can they be considered as safe (100% correct)? Thanks again, i'll go ahead and try to convert the maps into a .xdf file... /D Title: Re: 4B0906018AA basic maps defined Post by: mdz on June 22, 2016, 01:43:53 PM Well, I'm complete beginner in all this. I used 225hp TT and many other defined files as a reference to find and compare maps. Maps in folder "Maps" should be right, maps in folder "Unsorted" are the ones i found along the way or the ones I'm not sure. Would be very good if someone with experience would check through it. ::)
Title: Re: 4B0906018AA basic maps defined Post by: marian_gbg on July 17, 2016, 04:18:59 AM Here's my work in progress. First time defining bin so some axis are missing and some maps may be incorrect. Attached original bin also because it has different software version. ::) Are you sure that in LAMFA map (1BD80) "x" and "y" values are correct ? In the map pack above, LAMFA adres is 1BD94. Who is correct map pack for 018AA ECU with SW 352728 ? Title: Re: 4B0906018AA basic maps defined Post by: Jim_Coupe on November 20, 2016, 01:02:00 PM Any updates on defs on this ECU? Hard to find..
Title: Re: 4B0906018AA basic maps defined Post by: chain_slappinS4 on December 21, 2016, 03:20:27 PM Any updates on defs on this ECU? Hard to find.. heres a damos for a similiar ( how much, not sure ) but its for 4b0906018CM ecu ive included the hex file and a2l as well as the sgo.. Title: Re: 4B0906018AA basic maps defined Post by: TijnCU on December 22, 2016, 02:56:09 AM Totally different ecu, impossible to compare files.
But thanks for sharing anyway ;) Title: Re: 4B0906018AA basic maps defined Post by: chain_slappinS4 on December 22, 2016, 05:14:02 AM Totally different ecu, impossible to compare files. But thanks for sharing anyway ;) Sorry, thought it might be helpful Title: Re: 4B0906018AA basic maps defined Post by: Jim_Coupe on December 30, 2016, 12:24:04 PM I Added ESKONF to file above.
Title: Re: 4B0906018AA basic maps defined Post by: marian_gbg on January 22, 2017, 07:35:11 AM This is my repaired XDF for 018AA box with all correct maps needed for stage 1.
Title: Re: 4B0906018AA basic maps defined Post by: Jim_Coupe on January 22, 2017, 08:29:44 AM Nice thanks ill look into it
|