|
Title: MED9.1 - WinOLS - Offset Post by: m_chieppa on October 13, 2014, 09:55:58 AM Hi,
I did a lot of reading about the med9.1 and WinOls. I have a BDM read from my ECU, but now I a little stuck with importing the Damos for my ECU. I know I have to look for a map I know in my map and take a note of the (hex)location and then look at the Maps Pack and look at the (hex)location and note it. Then I calculated the Offset, when importing the Maps Pack I filled in the Offset I calculated, but when I look at other maps I see a lot of maps that don't line-up right. So I tried the Damos from here, same problem. But when I want to import Damos maps I can see in WinOLS how many maps line-up right. WinOLS says more then 600 maps don't line-up??? But for KFMIRL the map lines up, but for 600 others it doesn't..... :-( What am I doing wrong? Extra information: Car: Skoda Octavia Combi RS 2.0 TFSI Year: 2006 Engine: BWA (1Z0907115A) Maps Pack: 0261B00486.kp Damos: D915A_41W200.a2l If someone needs more information, just ask me. I hope someone can help me with this. I'm a little bit stuck now. Another question: When I input the offset for a Map Pack or Damos, does the offset also apply to the x and y axis location of the maps? Or do I have to do the offset manually with a hex calculator? Title: Re: MED9.1 - WinOLS - Offset Post by: ddillenger on October 13, 2014, 12:23:16 PM Not all maps will be offset by the same amount if the mappack is not for your specific ecu.
Title: Re: MED9.1 - WinOLS - Offset Post by: m_chieppa on October 14, 2014, 01:27:53 AM Ok
I see that the 0261B00486.kp file is for a: Car: Volkswagen Golf 2.0 TFSi Turbo 200PS / 147.1KW ECU type: MED9.1 Hardware version: 8P0907115 / 0261B00486 I searched for my car, I think I need a map pack with the number: 0261S02114 I didn't know that a map pack was specific for ECU hardware version number, because the ECU type and engine of the Golf is exectly the same as the Octavia, BWA. Title: Re: MED9.1 - WinOLS - Offset Post by: majorahole on October 14, 2014, 10:57:54 AM its to the h/w and s/w#
sometime the axis offset is different too. looks like youre gonna have to search them out. once you do, please post the mappack, so to maybe save the next guy a bit of time. thats what ive done for my sepcific ecu. we gotta work together!! Title: Re: MED9.1 - WinOLS - Offset Post by: m_chieppa on October 15, 2014, 12:10:08 AM I will give it a try.
At the moment I have an original map and a tuner map. Now I want to know what are the differences (why are they raised or lowered) and will start with those maps first to adjust the offset and the axis. I'm just a noob so it will cost me a lot of time to find it out. Are the axis always on front of the map or also at the end or in the middle or mixed? Title: Re: MED9.1 - WinOLS - Offset Post by: m_chieppa on October 15, 2014, 06:18:58 AM Also found this map pack: http://nefariousmotorsports.com/forum/index.php?topic=6882.0title=
This one perfectly matches my ecu, no offset needed. No see that I can find more maps to identify all differences from the original bin file and the tuned bin file. Title: Re: Post by: technic on December 04, 2014, 01:43:32 AM Axises are not always in front of the maps. They can be anywhere, but typically in the beginning of the file
|