|
Title: me7.1 to econoseal36 Post by: suf3r on October 14, 2014, 12:03:53 PM Hi, me7.1 has way more pinouts than econoseal36 and each pinout doesn' represent the actual one on me7.1. Let's pin 4 on econoseal doesn't match me7.1 it's another pin...
Just need what pin on econoseal match on 7.1... Thanks Title: Re: me7.1 to econoseal36 Post by: aef on October 14, 2014, 11:37:44 PM huh?
Title: Re: me7.1 to econoseal36 Post by: suf3r on October 15, 2014, 08:50:36 AM huh? I'm talking about VEMS, VemsTune on output section shows econoseal plug, but on my ECU wires connected via original plug. So pins showed in VemsTune doesn't match on ECU plug... Title: Re: me7.1 to econoseal36 Post by: nyet on October 15, 2014, 09:43:14 AM If you can't figure out how to wire VEMS, you probably shouldn't be using it :(
Title: Re: me7.1 to econoseal36 Post by: suf3r on October 15, 2014, 10:37:28 AM If you can't figure out how to wire VEMS, you probably shouldn't be using it :( It's already wired, so don't be sarcastic about what i can or not. Title: Re: me7.1 to econoseal36 Post by: nyet on October 15, 2014, 10:39:55 AM The short answer is, the ME7.1 ECU harness will not wire up directly to VEMS.
You'll need to do quite a few wiring hacks to get it working... not to mention cluster issues. Ditch VEMS and just learn how to tune ME7.1... you'll likely get better results anyway :) Title: Re: me7.1 to econoseal36 Post by: suf3r on October 15, 2014, 11:05:46 AM Yes, you right. On weekday will provide some pics how everythink looks like, it may give better understanding what i'm looking for.
|