|
Title: MPPS Issues flashing on Bench Post by: eliotroyano on October 16, 2014, 01:40:01 PM Hi friends. I have some issues flashing an OEM untouched 4B0906018CM 0261207435 ME7.5 ECU on Bench with MPPS V12.
I used MPPS V12 interface in the past without any troubles, but now it get in a Key OFF Key ON loop after indicate file for flash under WRITE request. I have done it 5 times and after I cancel it, getting an Error message. Anyone have this issue in the past? Any ideas to solve it? Title: Re: MPPS Issues flashing on Bench Post by: IamwhoIam on October 16, 2014, 01:44:55 PM disable immo
Title: Re: MPPS Issues flashing on Bench Post by: eliotroyano on October 16, 2014, 01:46:05 PM disable immo I already tryied Immo OFF without luck. Title: Re: MPPS Issues flashing on Bench Post by: ddillenger on October 16, 2014, 03:19:02 PM Change the speed to slow.
Title: Re: MPPS Issues flashing on Bench Post by: k0mpresd on October 16, 2014, 04:31:21 PM bootmode.
Title: Re: MPPS Issues flashing on Bench Post by: eliotroyano on October 17, 2014, 04:53:51 AM Change the speed to slow. I will try slow speed DD. A comment about my bench harness: I have not connected pin 121 to +12V, could that generate this kind of issue in that specific ECU? bootmode. I need to check it again, but when I try it yesterday, program close inmediately when I select "WRITE" in bootmode. After that program request me "Firmware Update". Every time I restart program it request " Firmware Update". I reset computer and reconnect interface and work again. I test read and was OK again. It took almost 11min for a 1Mb ME7.5 file at medium (default speed), but was done good. What do you suggest pals? I have using MPPS with antivirus OFF, no internet (just when I use the program) and no other programs. Maybe I will need to cleanup computer, uninstall and reinstall MPPS software, ....... I highly appreciatte your advice. Title: Re: MPPS Issues flashing on Bench Post by: overspeed on October 17, 2014, 05:47:52 AM I have similar issue when writing in the car... galetto 1260 worked like a charm...
Title: Re: MPPS Issues flashing on Bench Post by: eliotroyano on October 17, 2014, 01:58:09 PM Could Pin 121 no connection generate this kind of issue ??? ??? ??? ???
|