|
Title: Cheap Chinese VAG TACHO 2.5 and ept. Post by: s8s4vw on October 16, 2014, 05:00:37 PM I was playing around with my VAG TACHO 2.5 USB cable to retrieve my SKC. After many failed attempts I thought to run Tacho 3.01 and the cable stopped working.
The chip is a FT245BL. Can someone please upload the ept file so I can try to revive it? Thanks. Title: Re: Cheap Chinese VAG TACHO 2.5 and ept. Post by: Tigerimtank on October 18, 2014, 03:37:41 PM My USB 2.5 Cable has an ohter Chip. Here
Title: Re: Cheap Chinese VAG TACHO 2.5 and ept. Post by: Tigerimtank on October 18, 2014, 03:41:10 PM Here The ept from 245R Chip USB 5.0
Title: Re: Cheap Chinese VAG TACHO 2.5 and ept. Post by: turboat on October 19, 2014, 04:14:49 AM What are you trying read the skc from? Tacho clones are usually a pos. commander/vageepromtool/argdub's tool are nicer if it's 7.1/7.5
Title: Re: Cheap Chinese VAG TACHO 2.5 and ept. Post by: s8s4vw on October 19, 2014, 05:17:09 AM Was trying to read IMMO 2 box 6H0 from a 2000 VW Cabrio. That can not be done over OBD II, but I thought to give it a try with 3.01 and then the Cable got ruined.
Title: Re: Cheap Chinese VAG TACHO 2.5 and ept. Post by: s8s4vw on October 19, 2014, 07:05:57 AM No dice
Title: Re: Cheap Chinese VAG TACHO 2.5 and ept. Post by: flamy on February 07, 2023, 03:18:52 PM Found something useful in another forum. Helped fixing my VAG Tacho 2.5 cable.
Used MProg 3.5 to flash *.EPT to downgrade to v2.2 and updated afterwards with the *.EXE file. |