Title: AUM & AUQ ECU data.... Help....
Post by: scoot1043 on October 18, 2014, 08:03:55 AM
Hi, I have been editing my AUM software for a little while now and getting to grips. But now I am after more power and as the AUM and AUQ engines are the same other than different turbo wastegate actuators I thought why not as it is a 'factory' map...
So my question is will a AUQ 06A906032HN 0002 ECU data be ok to put on my AUM 06A906032DR ME7.5 0003 ECU?
Also when flashing this I don't write eeprom data do I?
Title: Re: AUM & AUQ ECU data.... Help....
Post by: fknbrkn on October 18, 2014, 03:15:23 PM
aum and auq engines are the same (wg actuators too)
main difference in software are ldrxn & ldrxnzk. so... its weird idea
Title: Re: AUM & AUQ ECU data.... Help....
Post by: scoot1043 on October 26, 2014, 02:12:04 PM
aum and auq engines are the same (wg actuators too)
main difference in software are ldrxn & ldrxnzk. so... its weird idea
ay, Thanks for the replay!!! has anyone got a good XDF and BIN file for a AUQ ECU? as I cant seem to get the check sums to be ok it says unfixable errors. This is what I get every time... :( maybe a incorrect XDF? (http://i1290.photobucket.com/albums/b525/Scott_Leach/mesumerror_zpscb986ff9.png) (http://s1290.photobucket.com/user/Scott_Leach/media/mesumerror_zpscb986ff9.png.html)
Title: Re: AUM & AUQ ECU data.... Help....
Post by: turboat on October 26, 2014, 04:10:00 PM
There's a good 032hn xdf around somewhere, take a look in the definitions forum.
Title: Re: AUM & AUQ ECU data.... Help....
Post by: nyet on October 31, 2014, 11:47:20 PM
Can you post the ori bin so i can add support for it in ME7Sum? Thanks!
Also make sure to download the latest version of ME7Sum.
Title: Re: AUM & AUQ ECU data.... Help....
Post by: nyet on October 31, 2014, 11:56:14 PM
Is this the one? ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Attempting to open firmware file 'bins/06A906032HN.bin'
Step #1: Reading ROM info ..
Searching for EPK signature...OK
Searching for ECUID table...OK
EPK : '40/1/ME7.5/5/4019.02//24C/Dst02o/220202//'
Part Number : '06A906032HN '
Engine ID : '1.8L R4/5VT '
SW Version : '0002'
HW Number : '0261207440'
SW Number : '1037363908'
Step #2: Reading ROMSYS ..
Startup section: word[0x008000]+word[0x00FFFE]
@008038 Add=0x00F6B5 CalcAdd=0x00F6B5 ADD OK
Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
@00803c Add=0xA3B1F1 CalcAdd=0xA3B1F1 ADD OK
All param page: word[0x010000]+word[0x01FFFE]
@01bef0 Add=0x00971D CalcAdd=0x00971D ADD OK
Step #3: Reading RSA signatures ..
Searching for RSA offset #0...OK
Searching for RSA offset #1...OK
Signature: @8f5e4-8f664
Modulus: @168d4-16954
Exponent: @16954 = 3
Searching for MD5 ranges...OK
MD5 Block Offset Table @168b0 [32 bytes]:
1) 0x00010002-0x00013FFE
2) 0x00014252-0x00017F4E
3) 0x00018192-0x0001FBDC
4) 0x00026A00-0x0002FFFC
EncrMD5: 02 7e 33 7a d2 89 80 58 d5 f7 00 df 42 75 ac 7a
CalcMD5: 02 7e 33 7a d2 89 80 58 d5 f7 00 df 42 75 ac 7a
OK
Step #4: Finding CRC table(s) ..
Searching for CRC table(s)...OK
CRC table(s) OK
Step #5: Reading Main Data Checksums ..
Searching for main data CRC pre block...missing
Searching for main data CRC/csum blocks...OK
Searching for main data CRC offsets...missing
Searching for main data checksum offsets...OK
Main Checksums:
1) 0x010002-0x013FFE CalcCSM: 00133BCE
2) 0x014252-0x017F4E CalcCSM: 00274FD0
3) 0x018192-0x01FBDC CalcCSM: 0044E763
4) 0x026A00-0x02FFFC CalcCSM: 00C15BB8
@8fe2a CSM: 00C15BB8 CalcCSM: 00C15BB8 Main data checksum OK
Step #6: Reading Main Program Checksums ..
Searching for main program checksum..OK
ROM Checksum Block Offset Table @1fb74 [16 bytes]:
1) 0x000000-0x00FBFF CalcChk: 48D184BF
0x00FC00-0x01FFFF CalcChk: 219E5BCF CalcCRC: 4C82430F SKIPPED
2) 0x020000-0x0FFFFF
<fffe0> Chk: 323E0957 CalcChk: 323E0957 OK (i)
Step #7: Reading Multipoint Checksum Blocks ..
Searching for multipoint block descriptor #1...missing
Searching for multipoint block descriptor #2...OK
1) <1fbde> 0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
2) <1fbee> 0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
3) <1fbfe> 0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
4) <1fc0e> 0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
Multipoint #2: [66 blocks x <16> = 1056 bytes]
*** Found 70 checksums in bins/06A906032HN.bin
*** DONE! 0 error(s) in bins/06A906032HN.bin! ***
Title: Re: AUM & AUQ ECU data.... Help....
Post by: scoot1043 on November 06, 2014, 02:40:01 PM
Can you post the ori bin so i can add support for it in ME7Sum? Thanks!
Also make sure to download the latest version of ME7Sum.
Thanks all for help, I have got the bin and XDF off here in different sections of the forum... The files are below...
Title: Re: AUM & AUQ ECU data.... Help....
Post by: nyet on November 06, 2014, 07:51:54 PM
Already have this file.
Latest ME7Sum should support it fine.
|