|
Title: 4B0906018DQ issue with RL/rlmax Post by: em.Euro.R18 on October 28, 2014, 01:22:39 PM rl and rlmax are stuck round 130% load. So I've adjusted KFMIOP load axis and last columns appropriately (rl should be 165%ish). LDRXN has been adjusted for 170% rlmax. raised HBN as necessary. Finally found LDIATA I'll give zero'ing that a shot next but I have a feeling theres something else at play here. Possibly KFMLDMX? but I've tryed searching comparing a "DC" defined binary's DMX values within 20% and nothing is found. The pattern doesn't seem to match anyone on the DQ (some where close but didn't make sense). This file seems like a complete mess compared to every other layout I've seen. I'm keeping the tune a bit conservative and its a rough start to make this a MAX MPG tune for daily driving.
Log and bin file attached Title: Re: 4B0906018DQ issue with RL/rlmax Post by: em.Euro.R18 on October 28, 2014, 01:26:29 PM log file
Title: Re: 4B0906018DQ issue with RL/rlmax Post by: em.Euro.R18 on October 28, 2014, 03:25:13 PM The layout of this binary is all over the place it seems, can I or would I just be better off flashing this ecu to 8E0909518AK? I wouldn't need to code the immobilizer would I?
Title: Re: 4B0906018DQ issue with RL/rlmax Post by: ddillenger on October 28, 2014, 03:49:10 PM The layout of this binary is all over the place it seems, can I or would I just be better off flashing this ecu to 8E0909518AK? I wouldn't need to code the immobilizer would I? Wait till you realize MLHFM........ Title: Re: 4B0906018DQ issue with RL/rlmax Post by: em.Euro.R18 on October 29, 2014, 08:18:55 AM So I've searched all over for the MLHFM map in the binary in 2D mode and nothing matches a defined "DC" bin. :o..... I have no idea why I can't find this 512x1 map. Either way why would the MAF scaler be the limiting factor? Maf is stock.
Title: Re: 4B0906018DQ issue with RL/rlmax Post by: em.Euro.R18 on October 29, 2014, 10:37:32 AM (https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/15468_914472145409_1758919672415356438_n.jpg?oh=31205508f867c44a3e93e7ce1ed02caa&oe=54E8D41F&__gda__=1424872206_3b140f2ba333d93eec5e51f84e09a1f4)
Pattern I could find and its not even close. Unless your telling me MLHFM is messed up somehow. Title: Re: 4B0906018DQ issue with RL/rlmax Post by: ddillenger on October 29, 2014, 01:35:19 PM I was just saying it's a weird binary.
Have you found KFTARX? Do you have any logs? Title: Re: 4B0906018DQ issue with RL/rlmax Post by: em.Euro.R18 on October 29, 2014, 03:02:25 PM KFTARX - 29728 just found it that could be an issue I'll test changes to that
I attached log in csv on the second post |