|
Title: Motorola / Carprog reading problem Post by: MK2-VRT on November 03, 2014, 05:56:07 AM I try to read the Motorola ( MC68HC05B6 ) with carprog.
I connect the Motorola correct with the A10 adapter, and select the write type of mcu, but he dont read it..Connect attempt 5 and after that nothing happens. The black and purple cable i have not connect.. I try with 3 immo boxen, i try also with a disconnected quartz on the pcb, try another .... hertz in options, and i try to desolder the mcu from the board and read again, but still no luck. Anyone knows what goes wrong ? Do i need powerd up the immo box or not needed ? |