|
Title: Coding automatic TCU Post by: itemonsale on November 09, 2014, 08:44:09 PM My current ride is a 02 Audi 1.8t A4 with 8E0909518F manual Transmission, I plan to swap in a auto(non-cvt) into my car . now my question is can I use my current 518F ECU with a donor Auto ECU(what Auto ECU I can use)? I found plenty of thread swapping auto to manual and using the VAGCOM to code the module, is it the same procedure to do it backward?
Yes I know i know it is wise to just sell the manual and get an auto but, I am doing this for my own reason. Thank you in advance. Title: Re: Coding automatic TCU Post by: ddillenger on November 09, 2014, 10:55:23 PM That file can be coded auto as well.
Title: Re: Coding automatic TCU Post by: itemonsale on November 10, 2014, 09:00:41 AM When it comes to flash I have to code 518F for a 518F Ecu, but what about the TCU? does it have to match 518F ? can you briefly guide me on this?
By the way can I use a 518AK ECU to use on my 518F chassis? Thank you! Title: Re: Coding automatic TCU Post by: ddillenger on November 10, 2014, 09:45:07 AM When it comes to flash I have to code 518F for a 518F Ecu, but what about the TCU? does it have to match 518F ? can you briefly guide me on this? By the way can I use a 518AK ECU to use on my 518F chassis? Thank you! You want tcu number 8E0927156A. I have one if you want it, 80 bucks shipped. Your 2002 is best served by a 518F ecu. Title: Re: Coding automatic TCU Post by: itemonsale on November 10, 2014, 10:07:13 AM Yes I will take it, PM me for the pay pal plz .
Can you briefly give me a guideline on how to get from Manual to Auto. code the ECU ( From Manual to Auto to accept TCU installed) code the TCU ( VIN , what else? ) What else I need to do in order to complete the coding process I have a donor ECU out of a 518AK, can I physically swap the ECU to my 518F? ( just a spare, that's all) Title: Re: Coding automatic TCU Post by: ddillenger on November 10, 2014, 10:20:02 AM PM sent.
But yes, just code the ecu tiptronic (2nd to last digit from 0 to 5). TCU won't need to be coded, but cluster will (CAN gateway). Adaptations, channel 60 gets incremented by 2. Title: Re: Coding automatic TCU Post by: diagnosticator on April 20, 2015, 02:59:18 AM Yes I will take it, PM me for the pay pal plz . Can you briefly give me a guideline on how to get from Manual to Auto. code the ECU ( From Manual to Auto to accept TCU installed) code the TCU ( VIN , what else? ) What else I need to do in order to complete the coding process I have a donor ECU out of a 518AK, can I physically swap the ECU to my 518F? ( just a spare, that's all) Use the 518AK ECU that ECU can be coded for 5 speed tiptronic trans, The 518F ECU cannot. You will need to copy the immo from the 518F to the 518AK ECU. Or, immo off in 518AK. Title: Re: Coding automatic TCU Post by: ddillenger on April 20, 2015, 12:50:23 PM Use the 518AK ECU that ECU can be coded for 5 speed tiptronic trans, The 518F ECU cannot. That is incorrect. Allowable variants for coding the 518F binary are as follows: (http://i.imgur.com/G8LxWzu.png) |