|
Title: S4 4.2 partial mappack Post by: smelly240 on November 14, 2014, 07:52:26 PM Tinkering on this with some rum and Dr Pepper... If anythings way off I'll fix it later.
this should go with the file in ORI section. I'm pretty certain about the lamfa, kflf, and kflbts. KFZWs I think are good (or close?). -Also KFMIRL/KFMIOP and KFSU/2 updated 1-21-15 Title: Re: S4 4.2 partial mappack Post by: smelly240 on November 16, 2014, 04:38:50 PM updated slightly.
ORI http://nefariousmotorsports.com/forum/index.php?topic=7247.0title= MAF Scale is not correct. Title: Re: S4 4.2 partial mappack Post by: smelly240 on January 09, 2015, 07:43:11 PM Updated with KFNWSE...
Title: Re: S4 4.2 partial mappack Post by: smelly240 on January 21, 2015, 02:04:24 PM can anyone check if i have the stuff in my NMAX STUFF folder in this mappack correct? Im not so sure of it.
Title: Re: S4 4.2 partial mappack Post by: smelly240 on February 07, 2015, 08:20:20 PM ORI
Title: Re: S4 4.2 partial mappack Post by: smelly240 on March 17, 2015, 05:58:21 PM anyone want to lend a hand for MSLUB and MSLBAS ? I want to block off my combi valves.
Title: Re: S4 4.2 partial mappack Post by: seishuku on March 17, 2015, 06:53:46 PM MSLUB @ 0x1B4BC
MSLBAS maybe @ 0x18A18, probably not though. Title: Re: S4 4.2 partial mappack Post by: smelly240 on March 18, 2015, 07:52:48 AM Thanks for chipping away at this a bit :)
I was looking in that area - the values for that are a lot lower than on other cars - and there isnt really anything directly comparable (closest i have is a 6 cylinder that is kinda similar). Title: Re: S4 4.2 partial mappack Post by: smelly240 on April 30, 2015, 04:10:00 AM CWKONABG 181ba
|