|
Title: Need help with bench Post by: Merculeus on November 21, 2014, 01:26:26 PM Hi, Im currently making a second cable because the ecu pin setup for 1.8T 97-98 is different. My first cable was for an a-box from my s4 b5 and it work like a charm.So i made the cable k-line,12v,ground.everything seems fine but when i try to connect to anything with it, i get that theres too many communication error.
Is there anybody that can help me make it work, at that point im clueless since my first setup work fine. thx Title: Re: Need help with bench Post by: k0mpresd on November 21, 2014, 03:57:10 PM pin 43 is only for flashing and must be disconnected for regular bench access.
Title: Re: Need help with bench Post by: Merculeus on November 21, 2014, 05:49:45 PM thank you God
Title: Re: Need help with bench Post by: turboat on November 21, 2014, 06:00:43 PM pin 43 is only for flashing and must be disconnected for regular bench access. Fairly sure that both Vcds and monoscan both connect fine with pin 43 powered up on a 99 euro agu... Title: Re: Need help with bench Post by: ddillenger on November 21, 2014, 06:07:52 PM Fairly sure that both Vcds and monoscan both connect fine with pin 43 powered up on a 99 euro agu... Too many communication errors to continue. Remove pin43. Should work. Title: Re: Need help with bench Post by: k0mpresd on November 21, 2014, 09:16:30 PM Fairly sure that both Vcds and monoscan both connect fine with pin 43 powered up on a 99 euro agu... fairly sure youre wrong. :) Title: Re: Need help with bench Post by: turboat on November 22, 2014, 02:33:11 AM Wouldn't be the first time ;D
Edit: Just checked my AGU bench loom, its definitely got 13.4v on pin 43. VCDS 14.10.0 connects to it fine and reads the fault codes. ECU is a 06A906018D from a Euro 98/99 AGU A3. Title: Re: Need help with bench Post by: k0mpresd on November 22, 2014, 10:26:19 PM Wouldn't be the first time ;D Edit: Just checked my AGU bench loom, its definitely got 13.4v on pin 43. VCDS 14.10.0 connects to it fine and reads the fault codes. ECU is a 06A906018D from a 98/99 AGU A3. that is whacky. ive never seen one that works with that pin connected. Title: Re: Need help with bench Post by: f1torrents on November 22, 2014, 10:50:58 PM I have 2 M5.x ecus for testing.
99 Passat 1.8T 8D0 907 557 P wont connect with PIN 43 connected. 99 Beetle 2.0 06A 906 018 AB Will connect with PIN 43 connected. I made my cable with a toggle switch to deal with both situations. Title: Re: Need help with bench Post by: TCSTigersClaw on November 24, 2014, 03:59:38 AM Wouldn't be the first time ;D Edit: Just checked my AGU bench loom, its definitely got 13.4v on pin 43. VCDS 14.10.0 connects to it fine and reads the fault codes. ECU is a 06A906018D from a 98/99 AGU A3. Little offtopic but I have a 018D Agu ECU from an A3 , I havent opened it yet . Is it flashable ? I hear it is m3.8.2 and it has a plcc eeprom :/ Title: Re: Need help with bench Post by: TCSTigersClaw on November 24, 2014, 04:50:56 AM in case and I think I am right 018D is not flashable , it should have pin43 connected :) a 018CG for example would not connect to vcds with pin43 connected ;D
Title: Re: Need help with bench Post by: turboat on November 24, 2014, 06:07:54 AM in case and I think I am right 018D is not flashable , it should have pin43 connected :) a 018CG for example would not connect to vcds with pin43 connected ;D That might explain a lot :) Title: Re: Need help with bench Post by: TCSTigersClaw on November 24, 2014, 09:56:16 AM Lol now that I read what I posted , I am glad you made sense :P
Title: Re: Need help with bench Post by: technic on December 01, 2014, 02:16:42 AM Stupid 018D ECUs - replace with newer and flash via OBD instead ;)
|