|
Title: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!? Post by: Iceman160785 on November 25, 2014, 11:53:36 AM Hello!:)
Hope some of you guys have time to help me out with a little problem! :) I have problem with starting/booting Argdubs Me7 tool in windows. have tryed to diffrent computers with win xp and win 8. but same problem on both.:( The program starts and i can see the dos/startup screen in 3sec before it stops and disapers.? i have tryed to run it in win xp and 7 compability witouth luck. You guys have any recomandations for me? :) Thanks! Title: Re: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!? Post by: turboat on November 25, 2014, 12:22:27 PM You need to run command line tools from the cmd, not from explorer. Take a look at this guide:
http://www.computerhope.com/issues/chusedos.htm Title: Re: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!? Post by: Iceman160785 on November 25, 2014, 01:31:35 PM You need to run command line tools from the cmd, not from explorer. Take a look at this guide: THanks!:) really apprecicate the help!http://www.computerhope.com/issues/chusedos.htm I have now found the program in dos. :) but what comand to use for eks. set com port? i use com port3. :) Ori ross-tech HEX+CAN cable in dumb mode. Title: Re: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!? Post by: turboat on November 25, 2014, 02:39:13 PM You need to make sure you use the rosstech vcp drivers, not the standard rosstech drivers.
Title: Re: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!? Post by: Iceman160785 on November 28, 2014, 04:22:38 PM You need to make sure you use the rosstech vcp drivers, not the standard rosstech drivers. OK thanks! Title: Re: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!? Post by: ddillenger on November 28, 2014, 04:37:39 PM For the record, neither of my hex-can cables work with anything com-port specific, and I have the VCP drivers.
Title: Re: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!? Post by: turboat on November 28, 2014, 04:49:24 PM Likewise, but I put that down to me not really caring enough to make it work, when there are kkl leads around.
Title: Re: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!? Post by: Iceman160785 on November 28, 2014, 07:43:42 PM Hi.
Tested little more tonight. Think i understand how this works in cmd now. ::) ;D hehe.. Tested with both original ross-tech HEX-USB+CAN cable in dumb mode and a GAlletto 1260 cable. Comport OK it says. but with both cabels i got a error code saying: Initating communication FAILURE ( =0X07) Some of you guys have any advise for this? ??? Thanks! Have a Nice Weekend! Title: Re: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!? Post by: turboat on November 29, 2014, 03:52:17 AM Unplug the cable, plug it back in, try again. I get that occasionally with my kkl lead.
Title: Re: Argdub ME7 95040 tool. problem to boot proram in Win XP and Win 8!? Post by: ktm733 on December 01, 2014, 10:39:56 PM I got the same message but I ran it in boot mode. After holding the boot pin a little longer it worked. Also i did it with galleto cable.
|