|
Title: Moates Roadrunner Emulator Post by: MIL_on on November 27, 2014, 01:41:28 PM Selling my Roadrunner Package, which contains:
-Roadrunner PCB -Byteswap Board -4 Headers to solder on the ECU instead flash -sealed plug-set to get outside the ecu -USB Cable purchased april 2014 directly from Moates for 625 US-$. Invoice comes with it. Customs charged me additional 85€. Used it 3-4 times to set up some individual tunes. works flawless. I can add a ECU (ME7.5 1.8t, 1mb) with already soldered header in it. Also two lids available: one welded, another glued to make the board fit in. The welded one has the plug on the upper side and the glued one on the side for different chassis versions. unnecessary to explain anything about the function, i guess? Price: Roadrunner + accessories 400€ + shipping (worldwide) Additional ECU: 150€ Location: Germany Title: Re: Moates Roadrunner Emulator Post by: MIL_on on December 01, 2014, 12:40:24 AM price update: 500€ incl. ecu!
Title: Re: Moates Roadrunner Emulator Post by: Frankenstein86 on February 16, 2015, 12:00:39 AM Hi is it still available?
Title: Re: Moates Roadrunner Emulator Post by: MIL_on on February 16, 2015, 03:32:16 AM nope, sorry. Didnt want to sell it for ridiculous offers, so i decided to keep it besides the ols300 and it was the best decision ;)
regards Title: Re: Moates Roadrunner Emulator Post by: vwaudiguy on February 16, 2015, 11:33:52 AM Sorry for the off topic question, but can you use this with Tunerpro only, and have map tracing? Thanks.
Title: Re: Moates Roadrunner Emulator Post by: MIL_on on February 17, 2015, 03:57:57 AM tracing doesnt work atm. neither with tunerpro nor winols.
Title: Re: Moates Roadrunner Emulator Post by: vwaudiguy on February 17, 2015, 12:38:59 PM Another question..So I assume you would have VCDS running via OBD to figure out the load points/real rpm (gauges are usually off) in realtime while changing values with the setup you have listed? This would be for steady state tuning on a dyno.
Title: Re: Moates Roadrunner Emulator Post by: prj on February 17, 2015, 12:57:54 PM If you use VCDS you're already doing it wrong.
Title: Re: Moates Roadrunner Emulator Post by: vwaudiguy on February 17, 2015, 01:44:08 PM Sorry, I meant to say ME7logger. :)
Title: Re: Moates Roadrunner Emulator Post by: misiozol on September 13, 2015, 06:59:54 AM Selling my Roadrunner Package, which contains: -Roadrunner PCB -Byteswap Board -4 Headers to solder on the ECU instead flash -sealed plug-set to get outside the ecu -USB Cable purchased april 2014 directly from Moates for 625 US-$. Invoice comes with it. Customs charged me additional 85€. Used it 3-4 times to set up some individual tunes. works flawless. I can add a ECU (ME7.5 1.8t, 1mb) with already soldered header in it. Also two lids available: one welded, another glued to make the board fit in. The welded one has the plug on the upper side and the glued one on the side for different chassis versions. unnecessary to explain anything about the function, i guess? Price: Roadrunner + accessories 400€ + shipping (worldwide) Additional ECU: 150€ Location: Germany Hi is it still for sale ? have no interest in ecu just roadrunner set live in ireland |