|
Title: flashing different ecus bench mode. Post by: ktm733 on December 02, 2014, 01:35:14 PM So I made a bench harness for me7.5 but i was wondering how do you do a read on other ecus for example I want to flash a 98 b5 1.8t and the ecu isn't a me7. How to i read this ecu? People say mpps will work but I need confirmation?
Title: Re: flashing different ecus bench mode. Post by: ktm733 on December 02, 2014, 01:48:37 PM Heres info on me3/5 but how do you find out if its a 3/5? Example i wanted to tune an 99 audi a6 with the 2.8l
4D0907551ah http://www.audizine.com/forum/showthread.php/502302-me3-5-bench-flash-set-up Title: Re: flashing different ecus bench mode. Post by: k0mpresd on December 02, 2014, 04:08:39 PM the solution for reading is to desolder and use a programmer. or if youre crafty there are other ways to dump it.
mpps will only write. 551ah is m5.92. Title: Re: flashing different ecus bench mode. Post by: ktm733 on December 02, 2014, 05:56:59 PM What chip are we desoldering? Is that only on the m5.92 desoldering is needed?
|