|
Title: Stage 1 with rs6 turbos Post by: kingkhalilz on December 04, 2014, 11:18:52 AM Is it possible to put a stage 1 tune on a car with rs6 type turbo's?? I have been playing around with the ideas in this thread and its not working out for me.
Title: Re: Stage 1 with rs6 turbos Post by: Lost on December 04, 2014, 12:31:55 PM Sure, why shouldn't it be that?
Just tune it as you want it too be. That is the point of custom tune. If you do it here, I would be happy to follow it, and help if I can. Title: Re: Stage 1 with rs6 turbos Post by: nyet on December 04, 2014, 12:50:35 PM I have been playing around with the ideas in this thread and its not working out for me. What have you been playing with? What isn't working out? Title: Re: Stage 1 with rs6 turbos Post by: mightemouce on December 04, 2014, 09:06:30 PM Yep you absolutely can.. I ran completely stock fueling on low boost with 0 issues for about 4 months before I picked up injectors and maf
Title: Re: Stage 1 with rs6 turbos Post by: kingkhalilz on December 05, 2014, 11:23:48 AM All i am trying to do is run waste gate pressure (around 15psi) with no throttle cut. I have attached the log. I played with LDRXN_1_A to attempt to request enough load. The problem is My specified load is higher but my requested load is still low, causing a deviation between actual load and requested. And Throttle cut happens. Why is my requested not following my specified?? I also added 11.5 to 1 afr when requesting 90% (i rescaled the axis to be 90% not .9%). Whats the next step??
Title: Re: Stage 1 with rs6 turbos Post by: nyet on December 05, 2014, 11:25:27 AM did you bother reading the wiki, which gives specific advice regarding KFMIRL and KFMIOP?
Title: Re: Stage 1 with rs6 turbos Post by: kingkhalilz on December 05, 2014, 11:28:13 AM I did, I am still trying to figure those maps out. I thought they where for torque intervention. Isn't this is separate issue??I have read IOP wont cause this issue and some posts say it will.
|