|
Title: 022906032BM Immo off Post by: nobug on December 13, 2014, 09:50:37 PM I have managed to read the eeprom but haven't had much luck setting the immo off.
It is a 95P08 eeprom 1K in size, the 95040 tool changes the last 512 bytes so they are not all FF like they should be. Me7 check gives me errors also. If someone could turn the immo off it would be greatly appreciated. This ecu has been a little frustrating to say the least but I am also learning more and more from it as I go. Cheers Title: Re: 022906032BM Immo off Post by: ddillenger on December 13, 2014, 10:18:54 PM Attached.
Title: Re: 022906032BM Immo off Post by: nobug on December 13, 2014, 10:33:22 PM Attached. Thank You! Very much appreciated.... Title: Re: 022906032BM Immo off Post by: nobug on December 14, 2014, 06:30:13 AM Attached. Did you use a tool for this or just change the two instances 01 to 02? if so do those changes effect the checksum? Learning as I go, the 95040,95320 and 24c04 etc haven't been hard but the 95P08 has been a bit of a challenge, we have a VW-Audi shop and do engine swaps etc. these forums have been a great help. We have been waiting for close to a week for a company to do this immo delete. Last response was to send them the ecu. So I thought I would give it another try. Title: Re: 022906032BM Immo off Post by: ddillenger on December 14, 2014, 06:40:50 AM Did you use a tool for this or just change the two instances 01 to 02? if so do those changes effect the checksum? Learning as I go, the 95040,95320 and 24c04 etc haven't been hard but the 95P08 has been a bit of a challenge, we have a VW-Audi shop and do engine swaps etc. these forums have been a great help. We have been waiting for close to a week for a company to do this immo delete. Last response was to send them the ecu. So I thought I would give it another try. Look at the file. I did it manually, checksums are good. Title: Re: 022906032BM Immo off Post by: nobug on December 15, 2014, 01:29:55 PM Had to do another one today, was much easier the second time.
|