|
Title: ftip ft232r eprog setup for vcds walkthrough needed Post by: sammie9271 on December 16, 2014, 07:36:16 PM so ive been trying for days now to get my eob-1260 cable working with vcds lite but no luck, I got good drivers I believe and can look cable information with ft prog but I don't now what I have to do to change it to a ross tech cable :/ any help would be appreciated
Title: Re: ftip ft232r eprog setup for vcds walkthrough needed Post by: ddillenger on December 17, 2014, 12:25:25 AM so ive been trying for days now to get my eob-1260 cable working with vcds lite but no luck, I got good drivers I believe and can look cable information with ft prog but I don't now what I have to do to change it to a ross tech cable :/ any help would be appreciated Galletto bundled cables will only work with Galletto software. The hardware is incompatible with VCDS. Title: Re: ftip ft232r eprog setup for vcds walkthrough needed Post by: sammie9271 on December 18, 2014, 01:02:36 AM I read somewhere tho (ill try and find the link) you can use ftdi software to flash your cables firmware and make it a vcds cable, the cable uses the same ft232rl chip, or is this a lost cause :(
Title: Re: ftip ft232r eprog setup for vcds walkthrough needed Post by: ddillenger on December 18, 2014, 07:14:17 AM I read somewhere tho (ill try and find the link) you can use ftdi software to flash your cables firmware and make it a vcds cable, the cable uses the same ft232rl chip, or is this a lost cause :( The hardware in your cable is incompatible with VCDS. It's a lost cause. Title: Re: ftip ft232r eprog setup for vcds walkthrough needed Post by: sammie9271 on December 19, 2014, 02:17:05 AM will this work?
http://www.ebay.com/itm/VAG-COM-OBD2-USB-Cable-Auto-Diagnostic-Scanner-Tool-KKL-409-1-VW-AUDI-SEAT-Volks-/370795577959?hash=item5655238267&item=370795577959&pt=Motors_Automotive_Tools&vxp=mtr Title: Re: ftip ft232r eprog setup for vcds walkthrough needed Post by: b3n4 on December 19, 2014, 04:30:32 AM Looks like it
Title: Re: ftip ft232r eprog setup for vcds walkthrough needed Post by: sammie9271 on December 19, 2014, 02:34:27 PM badass you guys are awesome thanks for the help, hopefully when it gets here I can figure out whats wrong with her, ive invested to much time and money to stop learning now! lol
Title: Re: ftip ft232r eprog setup for vcds walkthrough needed Post by: sammie9271 on December 19, 2014, 02:45:56 PM recent engine overhaul, ran great for one drive cycle, now it wont run :/
|