|
Title: ME 3.8.3 - Internal Control Module: ROM Error Post by: Sirocco20348 on January 10, 2015, 12:51:25 PM Hey everyone,
I am running into a problem with a flash tune from a reputable company. They have been really good thou and are investigating the problem. I just thought I would post it on here to see if anyone has encountered a similar situation and knows the answer to the problem. Car:
Scenario: With the standard stock file, I have no faults listed in the engine module and my cruise control works. Once the stage 2 tune file is applied, I lose my cruise control and the following error appears: Quote 16989 - Internal Control Module: ROM Error P0605 - 35-00 - - Apart from the loss of cruise control, the car drives really well. Does anyone have any thoughts as to what the error might mean and why I have lost my cruise control? Thanks. Title: Re: ME 3.8.3 - Internal Control Module: ROM Error Post by: daniel2345 on January 10, 2015, 02:22:27 PM Checksum error in your Stage2 File.
Cruise Control gets disabled when a serious error is present, which is an rom error. Title: Re: ME 3.8.3 - Internal Control Module: ROM Error Post by: Sirocco20348 on January 10, 2015, 03:21:13 PM Thanks for the reply!
Are there multiple check sum values? Or is there only one main checksum in the bin file? I am assuming that since its a custom tune, Winols would not be able to verify if the checksum is correct? Title: Re: ME 3.8.3 - Internal Control Module: ROM Error Post by: daniel2345 on January 11, 2015, 08:55:39 AM There is one standard Bosch checksum inside.
Ols with correct module can build a correct checksum even over a jpg if you want to flash that to your ecu ;) So no Problem for your file. Post your file under checksum request section, i guess there you can get help. Title: Re: ME 3.8.3 - Internal Control Module: ROM Error Post by: k0mpresd on January 11, 2015, 09:16:23 AM this is a 16bit, 1 byte fix. simple.
Title: Re: ME 3.8.3 - Internal Control Module: ROM Error Post by: overspeed on January 11, 2015, 01:40:43 PM Wrong oem file used...
Example use 018cg instead of 018r |