|
Title: new project : find KRKTE Post by: bastoon_77 on January 12, 2015, 02:04:37 PM Hi all
i start my new project : a golf v6 2.8 24v (also named vr6) with a gt3076 turbo origine injector 239cc and new 440cc ... so when my engine start there is lot of smoke ! i download my ecu with MPPS i start to read S4 wiki but first probleme : i don't find a .xdf for my me7.1.1 022906032BG so i'll make my xdf definition ! winols find many map that i creat in my new .xdf but what about KRKTE ? How it's posible to find the KRKTE single value ? thank's to all and sory for my english... Title: Re: new project : find KRKTE Post by: k0mpresd on January 12, 2015, 02:05:25 PM post original or no one is going to help you.
Title: Re: new project : find KRKTE Post by: bastoon_77 on January 12, 2015, 02:28:57 PM i post my ori file in the "Original ECU File"
but i can post it here : Title: Re: new project : find KRKTE Post by: ddillenger on January 12, 2015, 02:38:26 PM 1E3A2
Title: Re: new project : find KRKTE Post by: bastoon_77 on January 12, 2015, 03:15:54 PM thank's !!!
but how you do ? i'll use 0.000111 factor, it's good ? so my original krkte is 0.09113 ! Title: Re: new project : find KRKTE Post by: tnel20 on January 12, 2015, 06:27:03 PM no that most likely will not work
try .07756 -do you have a wide band? Title: Re: new project : find KRKTE Post by: ddillenger on January 12, 2015, 08:17:16 PM 0.000167
Title: Re: new project : find KRKTE Post by: bastoon_77 on January 12, 2015, 11:25:18 PM yes a have a aem wideband
actualy my afr is about 10,5 at idle .... ::) lot of black smoke... thank's i try with this Title: Re: new project : find KRKTE Post by: bastoon_77 on January 17, 2015, 12:43:13 PM it's ok i modify the .bin with the new krkte 0.07131
i'm now searching for scale my maf, the original is 071 906 461 B 70.8 mm Inside the new is 078 906 461 B (s4 2.7biT maf) 76.6mm inside i find my MLHFM adress is @14254 but it's strange : MLHFM start at 155.10 kg/h and end at 1109.20 kg/h and on a s4 2.7biT MLHFM start at 00 kg/h and end at 1213.10 kg/h why on my golf it start at 155kg/h and in a s4 it start at 00kg/h ? do it is because it is an atmospheric car ? or i don't use the good adress ? thank's a lot ! Title: Re: new project : find KRKTE Post by: KmosK04 on January 17, 2015, 02:02:15 PM You're looking at the wrong file. This file has Hitachi MAF. S4/RS4 with Bosch MAF: MLHFM starts with 124.6 and ends with 1996.1
Title: Re: new project : find KRKTE Post by: ddillenger on January 17, 2015, 02:04:14 PM You must take into consideration the offset contained in MLOFS for Bosch MAF.
Title: Re: new project : find KRKTE Post by: bastoon_77 on January 17, 2015, 03:35:44 PM You must take into consideration the offset contained in MLOFS for Bosch MAF. Fortunately I post in the noob section... so i just had to take the maf values s4 (with bosh maf ::)) and it's ok ? next i think with the turbo I'll exceed the value of MLMAX but i don't find MLMAX in my dump... it's not same as in a s4 xdf... anyone know how to find it ? |