|
Title: Cluster swap Post by: jun42 on January 15, 2015, 06:52:23 AM Hi everyone,
I just found this forum and have been doing a lot of reading, and I want to make sure I have things right. I have a B6 A4 3.0 with 8E0920950L Bosch RB4 cluster, and I would like to swap in 8E0920981C from a 04 B6 S4. What I would need to do is find the SKC of the 950L and 981C cluster, virginize the S4 cluster and then adapt the S4 cluster to my car? Are there any issues to consider if I have an early VIN A4 with the IMMO icon on the cluster instead of TPMS? Title: Re: Cluster swap Post by: BDK on January 15, 2015, 10:23:41 AM I'd bet you have a crypto cluster. I wouldn't use any cheap clone tools or you will probably have issues. Your old cluster pin can be read from the ecm (they are the same). The new one will need to be read with a good tool. Avdi works, I know some others claim to as well.
Title: Re: Cluster swap Post by: k0mpresd on January 15, 2015, 10:39:41 AM ive used genuine vagtacho on cryptos plenty of times.
im betting guy bricks this one. Title: Re: Cluster swap Post by: ddillenger on January 15, 2015, 11:40:05 AM Vag eeprom programmer 1.19 is foolproof. Use that.
Title: Re: Cluster swap Post by: jun42 on January 15, 2015, 05:31:36 PM Vag eeprom programmer 1.19 is foolproof. Use that. Thanks. This is what I'm planning to use. Title: Re: Cluster swap Post by: ddillenger on January 15, 2015, 05:35:49 PM Remember, before you do ANYTHING, make FULL encrypted, and decrypted backups.
|