|
Title: Audi A4 -01 Key matching problem Post by: RPRsn on January 15, 2015, 11:57:34 AM Hello and greetings from Finland!
I have a big problem with key matching. Story goes like this, my wife bought Audi A4 -01 with that sadly famous magneti marelli instrument cluster. So cluster does not work at all when it is cold, little bit of life when it gets warm. I bought VDO cluster to fix this problem but that VDO has also strange problems.. Adaption channel 50 does not work at all? I read that when channel 50 does not work, you must do adaption with control module map. Well i ignored this and write SKC from old cluster to new cluster in EEPROM, VagTacho gives now the right SKC. But now i have problem with key matcing. If I try vag-com key adaption (channel 21), software says only error and do nothing. VagTacho says same. Key chips ID48 are virgin and brand new. Is there any ideas to do this adaption? Any ideas is welcome! Title: Re: Audi A4 -01 Key matching problem Post by: 10101011 on January 17, 2015, 06:41:32 PM Oh boy .... when you login ...did you enter the pin # as the login #?
Title: Re: Audi A4 -01 Key matching problem Post by: RPRsn on January 20, 2015, 09:52:28 AM Well.. Im not sure did i understand what you mean about that.. But anyway login is allright, new module with
old module SKC. Same like that was adapted in channel 50 etc. But the problem is in programming keys. Login -> Adaption -> Channel 21 -> New value = 1 -> Test -> ERROR I read fault codes and ecu gives this: 18058 - Powertrain Data Bus: Missing Message from Instrument Cluster P1650 - 35-00 Cluster gives 01300 - Control module for Navigation with CD-Rom (J401) 49-00 - No communication 01179 - Incorrect Key Programming 35-00 And CAN gives no response.. Am i stupid or is there something what i did not noticed.. I made all this successfully with my own Golf couple of years ago.. Could there be problem with ECU or in communication? Title: Re: Audi A4 -01 Key matching problem Post by: 10101011 on January 20, 2015, 10:54:51 AM Do you have the PIN #. ...and did you use the pin as a lgoin ?
Title: Re: Audi A4 -01 Key matching problem Post by: RPRsn on January 20, 2015, 12:23:43 PM Yes, if you mean pin as SKC and yes i use that in login.
|