|
Title: 8N0906018H KFTARX Post by: carsey on February 01, 2015, 02:35:44 PM Hi all
Does anyone know the addresses for KFTARX on a 018H file (360313)? Ive found the RPM axis no problem, but I cant see to match the map data up as well as the temperature axis? I have 12FF6 as the RPM axis. Chris Title: Re: 8N0906018H KFTARX Post by: ddillenger on February 01, 2015, 03:04:46 PM KFTARX: 0x1E932 (8x12)
RPM: 0x12FF6 TEMP: 0x1010B Title: Re: 8N0906018H KFTARX Post by: carsey on February 02, 2015, 05:54:29 AM Thanks. It's all 1 across the board you use to numb the whole map isn't it?
Title: Re: 8N0906018H KFTARX Post by: Beaviz on February 02, 2015, 07:34:11 AM Thanks. It's all 1 across the board you use to numb the whole map isn't it? Yes. 1 = no correction. Title: Re: 8N0906018H KFTARX Post by: carsey on February 02, 2015, 09:34:13 AM Cheers, just edited my map there. Seems slightly different to the 018CB one as 018CB shows as 10x12 and 018H is 8x12.
Thanks again. Been bugging me for a while that one PS - setting map to 1 or higher brings up value: - 0.007905. This still good for no corrections? Title: Re: 8N0906018H KFTARX Post by: carsey on February 28, 2015, 02:28:03 PM Anyone know why this map wont set as 1 across the whole board? Can only get 0.007905
Title: Re: 8N0906018H KFTARX Post by: adam- on February 28, 2015, 03:20:10 PM Helps if you use the right settings Chris! ;)
Title: Re: 8N0906018H KFTARX Post by: carsey on February 28, 2015, 03:31:00 PM ::) :-[ :-[
|