|
Title: FUEREG Post by: masterj on February 04, 2015, 11:25:56 AM Does anyone know what FUEREG module does? It outputs drlfue_w which corrects rlsol_w in BRLPSSOL when transferring air mass to required throttle plate angle.
Title: Re: FUEREG Post by: ddillenger on February 04, 2015, 11:27:21 AM Does anyone know what FUEREG module does? It outputs drlfue_w which corrects rlsol_w in BRLPSSOL when transferring air mass to required throttle plate angle. There is a big thread about this, I'll try to find the link. Title: Re: FUEREG Post by: nyet on February 04, 2015, 11:28:48 AM It is a PI regulator that corrects throttle plate angle based on the difference between rl and rlsol
Title: Re: FUEREG Post by: masterj on February 05, 2015, 12:21:24 AM It is a PI regulator that corrects throttle plate angle based on the difference between rl and rlsol Ah now I see, thanks Title: Re: FUEREG Post by: masterj on February 05, 2015, 12:22:11 AM There is a big thread about this, I'll try to find the link. Please do, I'm interested on ideas how people tune this module Title: Re: FUEREG Post by: masterj on February 05, 2015, 10:57:27 AM BTW: most of the FUEREG is active ONLY during idle (whole bottom part as controlled by BBFUEREG). At least in my file the top part is disabled by ILMRMX = 0 and ILMRMN = 0. So I guess this whole module produces drlfue_w = 0 for the non-idle operation.
|