|
Title: MPPS V12 problems Post by: Lost on February 17, 2015, 01:24:22 PM I am having Mayor problems with mpps v12.
I does not matter how i read the file it comes out scrambled and onlu 300kb. Reading 1mb 29800 chip. I have tested in the car, boot on the bench, different ecu. What is cousing this??? Title: Re: MPPS V12 problems Post by: _mumin_ on February 17, 2015, 01:34:25 PM You want to read original ecu or tuned by someone else? When Ecu is tuned it can have NOREAD tag and MPPS will read scrambled data.
Title: Re: MPPS V12 problems Post by: vwaudiguy on February 17, 2015, 01:42:02 PM Sounds political. ;D
Title: Re: MPPS V12 problems Post by: Lost on February 17, 2015, 02:01:24 PM You want to read original ecu or tuned by someone else? When Ecu is tuned it can have NOREAD tag and MPPS will read scrambled data. 2 of ECUs is not tuned by anybody else but me end the third one is original. I started having problems with cheap mpps v13. Toasted it and bought much more expensive v12 that comes with the box. Still problems. V12 is readaing high Voltage 16.5V. But the actual Voltage is 12.5. I have messured it. I also have changed my 12V charger. I dont know what the fuck is the problem Title: Re: MPPS V12 problems Post by: prj on February 17, 2015, 04:18:43 PM Clone tools is the problem... I am sure the original one will work.
Also, if you are using OLS, make sure it is not pushing in the NOREAD tag. Though that does not explain why it doesn't work on an original ECU. Title: Re: MPPS V12 problems Post by: Lost on February 17, 2015, 10:15:58 PM I am using TP.
It has too be cloons pore quality. v13 i have has been flawless for a long time. V12 worked for a whole 24h after than it looks like it reads and writes. But checking with vcds ecu id, nothing would be done or brick. Very irritating. Title: Re: MPPS V12 problems Post by: aef on February 18, 2015, 12:41:22 AM My mpps from china is working good. Benchsetup works best with voltage under 12v.
side note: When writing my S3 8L in car i noticed a noise from the back of the car. Is this the fuel pump oder maybe haldex? Title: Re: MPPS V12 problems Post by: Lost on February 18, 2015, 01:12:59 AM I noticed that new cable v12 i got is reading very high voltage.
16.5. That is on small 12v wall converter dongle. Messuring on dongle it shows 12.5v. My other charger 12v 4amp is putting out 15.5v. On that one v12 mpps is reading 19.5v and does not work at all. Title: Re: MPPS V12 problems Post by: Lost on February 25, 2015, 03:50:08 AM Little update.
Those mpps cloons are really crap. Got me a new one sent by seller. That one is completily off. Plugg in the 2 of my laptops - and Windows does not even recognise it. It is like an empty usb :)) No drivers work on it. My old mpps V13.2 is working from time to time. When it works it shows 12.5-13V. When it doesnt it shows 16.5V I am feeding it with 12V dongle that delivers 11.8V I have changed 4 of those chargers as well So now i am going back to Galletto 1260 and forgett abot mpps crap. Title: Re: MPPS V12 problems Post by: aef on February 25, 2015, 04:28:26 AM Where do you buy from?
I had several from xcar360 and they all work fine. Title: Re: MPPS V12 problems Post by: narf0815 on February 25, 2015, 04:31:13 AM My v13 Clone works very well, runs on a 10inch tablet with Windows 8.1.
Title: Re: MPPS V12 problems Post by: Lost on February 25, 2015, 06:18:20 AM Those v12 more expensive version that comes with silver box, i bought from Germany.
Those did not work. And a cheapest one v13.2 i got from UK.. Anyway everything comes drom China just different sellers Title: Re: MPPS V12 problems Post by: sonique on May 30, 2015, 08:22:51 AM try clone v16 version
much better quality previous version v12-13 Title: Re: MPPS V12 problems Post by: vwaudiguy on May 30, 2015, 10:46:36 AM try clone v16 version much better quality previous version v12-13 Do you have a trusted link by chance? Title: Re: MPPS V12 problems Post by: sonique on May 30, 2015, 12:08:50 PM Do you have a trusted link by chance? not 100% trust seller any aliexpress v16 good but 2 version available green and blue pcb green pcb version not problem 100% work fine . blue pcb version need rework approx 3 smd because volt indicate to high but after change 100% working fine .. http://www.obd2express.co.uk/wholesale/newest-mpps-ecu-chip-tuning-edc15-edc16-edc17-checksum.html (http://www.obd2express.co.uk/wholesale/newest-mpps-ecu-chip-tuning-edc15-edc16-edc17-checksum.html) Title: Re: MPPS V12 problems Post by: h100vw on September 01, 2015, 11:36:25 PM That link says Windows XP sp2, is that a minimum or the only OS it runs with? W7 any good?
Thanks Title: Re: MPPS V12 problems Post by: sonique on September 02, 2015, 08:21:31 AM That link says Windows XP sp2, is that a minimum or the only OS it runs with? W7 any good? v16 working fine windows 7 32 and 64bit Thanks Title: Re: MPPS V12 problems Post by: Dave9n3 on November 23, 2015, 06:11:11 AM sorry if this isnt allowed - i thought i would bump an old thread rather than create new. Do people rate the galletto 4 clones? or am i best just getting a stable mpps or galletto 1260. thanks in advance
Title: Re: MPPS V12 problems Post by: aef on August 18, 2020, 01:28:19 PM anyone managed to kill a good old mpps v12/13 cable?
google didnt come up with much info about "no information" only that LM339 is killed maybe Should the update device/interface exe work to fix this? Title: Re: MPPS V12 problems Post by: bamofo on August 19, 2020, 05:31:56 AM anyone managed to kill a good old mpps v12/13 cable? google didnt come up with much info about "no information" only that LM339 is killed maybe Should the update device/interface exe work to fix this? Nope but ive killed (2) v18's and a V21 lol. the 16 is old faithful for me at this point and its not even that good. |