|
Title: can't find KFMLDMX Post by: ktm733 on February 22, 2015, 04:21:53 PM Can someone please help me find this map? I can't seem to find it anywhere!
oops clicked wrong file Title: Re: can't find KFMLDMX Post by: ddillenger on February 22, 2015, 05:07:47 PM That is an xdf. Need a binary to find anything bud :)
Title: Re: can't find KFMLDMX Post by: ktm733 on February 22, 2015, 06:07:21 PM updated haha must of clicked wrong file. Any ways that xdf goes to the file.
Title: Re: can't find KFMLDMX Post by: ddillenger on February 22, 2015, 06:31:08 PM That map is fucked up. It's 9x8, but only 8x8 of it is used. It took me quite a while to find/figure that out.
0x13C38 Title: Re: can't find KFMLDMX Post by: ktm733 on February 22, 2015, 07:33:09 PM Thats why!!! >:( thank you. So correct me if i'm wrong but this map is defiantly a load limiter?
Title: Re: can't find KFMLDMX Post by: vwaudiguy on February 22, 2015, 08:00:46 PM It looks like the cam changeover maps have the rpm axis wrong. Any thoughts on the issue?
Title: Re: can't find KFMLDMX Post by: ktm733 on February 22, 2015, 08:07:14 PM Are you talking about kzfw? never noticed that? Why is that?
Title: Re: can't find KFMLDMX Post by: ktm733 on February 22, 2015, 08:36:23 PM can you look at my xdf for the map kfmldmx and tell me what i need to put in there to make it look right? I don't have any maps to base mine off.
Title: Re: can't find KFMLDMX Post by: vwaudiguy on February 22, 2015, 08:52:48 PM Are you talking about kzfw? never noticed that? Why is that? KFNWSE, and KFNWWLE in the VVT folder. I didn't look through the whole thing, just noticed those two. Title: Re: can't find KFMLDMX Post by: ktm733 on February 22, 2015, 08:55:26 PM Can someone please help me find this map? I can't seem to find it anywhere! posted wrong bin. out6 is the most recent binoops clicked wrong file Title: Re: can't find KFMLDMX Post by: ddillenger on February 23, 2015, 12:20:50 AM Do not change the 300 row of this map. It's not a load limiter, it's the threshold for MAF diagnosis in kg/h. It should be calibrated so as to be roughly 30 percent in excess of your airmass. There is no need to add 30 percent to this table in a stage1/2 file, simply changing the peak (2-6000rpm, 50-100percent throttle angle) points.
Do me a favor, remove your test and out6 binaries, just post the original file in the OP. Title: Re: can't find KFMLDMX Post by: ktm733 on February 23, 2015, 09:07:01 PM ok but problem i don't know how the map is set up. I use tuner pro and i need the conversion equation/maping info
Title: Re: can't find KFMLDMX Post by: ddillenger on February 24, 2015, 08:01:22 AM Did you look at the xdf I uploaded? I added the map to your xdf, filled in everything, and sent it back.
Title: Re: can't find KFMLDMX Post by: ktm733 on February 24, 2015, 12:32:29 PM Wait you did that for me!! Thank you haha solving my head aches! Wish i had more knowledge so I could give back.
Title: Re: can't find KFMLDMX Post by: ddillenger on February 24, 2015, 12:40:06 PM Wait you did that for me!! Thank you haha solving my head aches! Wish i had more knowledge so I could give back. Yes I did. No worries. Happy to help. As for giving back, just keep the thread updated, keep working. You'll get there. Title: Re: can't find KFMLDMX Post by: ktm733 on February 24, 2015, 01:05:53 PM So I don't need to mess with this map to request 20psi? What would i need to do to the throttle angle map? I've messed with kfmldmx i believe off the top of my head to try and meet requested load. Yet no success. Not even alittle.
Title: Re: can't find KFMLDMX Post by: ddillenger on February 24, 2015, 01:19:11 PM I explained the purpose of this map already. Read it again, then read the wiki.
Title: Re: can't find KFMLDMX Post by: nyet on February 24, 2015, 01:29:05 PM Also stop trying to "meet requested load"
Title: Re: can't find KFMLDMX Post by: ktm733 on February 25, 2015, 04:22:50 PM Okay i have some time finally. I'm posting up logs were its my normal tune as posted earlier then my second log is waste gate raised to 95 the whole way yet my duty cycle didn't follow it? I will get to the bottom of this! My goal is to have 21psi then drop off to 12psi by red line. yet boost will not follow my ldrxn? you have my file and logs so hopefully that's enough.
Title: Re: can't find KFMLDMX Post by: ddillenger on February 25, 2015, 04:26:12 PM Can you please log with me7logger?
Title: Re: can't find KFMLDMX Post by: ktm733 on March 27, 2015, 05:16:28 PM question.... ddlinger. you said (peak (2-6000rpm, 50-100percent throttle angle) what are you satating to do? what I guess what I am asking is where do I start when tuning this map?(throtle angle)?
|