|
Title: 2003 Allroad 4Z7 907 551 R Post by: hello on March 01, 2015, 03:17:04 PM After flash car cranks but no start (no cel). Accidentally flashed a s4 file instead of the original file but with egt deletes. Tried to flash with galetto, it erases but fails at writing. Any ideas?
Title: Re: 2003 Allroad 4Z7 907 551 R Post by: ddillenger on March 01, 2015, 03:23:03 PM Need moar galletto action. Try varying the voltage :)
Title: Re: 2003 Allroad 4Z7 907 551 R Post by: hello on March 01, 2015, 04:19:25 PM Ok, I will give this a shot. Will report back.
Title: Re: 2003 Allroad 4Z7 907 551 R Post by: hello on March 01, 2015, 04:34:02 PM No dice. Same problem.
Title: Re: 2003 Allroad 4Z7 907 551 R Post by: ddillenger on March 01, 2015, 04:43:45 PM I had this recently when my bench cable had a poor connection. Redid it, all good.
Title: Re: 2003 Allroad 4Z7 907 551 R Post by: hello on March 01, 2015, 05:10:53 PM Ok, will try this again. Was it voltage Positive and ground related?
Title: Re: 2003 Allroad 4Z7 907 551 R Post by: ddillenger on March 01, 2015, 05:14:05 PM Ok, will try this again. Was it voltage Positive and ground related? Yep. Power issue. Would erase, then fail before starting the write. Title: Re: 2003 Allroad 4Z7 907 551 R Post by: hello on March 01, 2015, 05:24:49 PM Ok, makes more sense now. Ok, I checked over the bench harness to figure out it looks ok but I have another one I can put together again so I try that. Ok, so the same thing happens again(flashing stock allroad fill) erasing and writing fails. And curiously I have done a data read and it came back with this DATA READING
Start data reading...ERRORE DATAECU. Now this is because the ecu was erased correct? Title: Re: 2003 Allroad 4Z7 907 551 R Post by: ddillenger on March 01, 2015, 06:19:14 PM Ok, makes more sense now. Ok, I checked over the bench harness to figure out it looks ok but I have another one I can put together again so I try that. Ok, so the same thing happens again(flashing stock allroad fill) erasing and writing fails. And curiously I have done a data read and it came back with this DATA READING Start data reading...ERRORE DATAECU. Now this is because the ecu was erased correct? It's a program issue. Not sure exactly what, but.... What cable are you using? If you can't get it, send me the ecu, I will fix it for you. 0 dollars. Title: Re: 2003 Allroad 4Z7 907 551 R Post by: hello on March 01, 2015, 06:36:33 PM Unfortunately an ebay rep galetto. Thank you. I will continue to try it until tonight/ If i can't get it to work, I appreciate the offering and I will take it. But I will not let you do it for 0$, I will include something in the package. :o
Title: Re: 2003 Allroad 4Z7 907 551 R Post by: hello on March 01, 2015, 09:08:42 PM No luck with this. Even with the second harness. I think best if I send it to you. How do you want to go about this? Pm or email?
Title: Re: 2003 Allroad 4Z7 907 551 R Post by: ddillenger on March 01, 2015, 09:09:22 PM Email or FB me. Email is in my profile.
Title: Re: 2003 Allroad 4Z7 907 551 R Post by: hello on March 01, 2015, 09:15:22 PM Will do thank you.
|