|
Title: M3.8.3 flash with NefMoto?? Post by: rrdiag on March 03, 2015, 09:10:46 AM Hey guys... can i flash a M3.8.3 of an AGU in a GolfIV of `98 with the NefMoto-Flashersoftware??
Or is it possible with KessV2?? Is the M3.8.3 a 29F200 or 29F400?? I need some Informations please... Title: Re: M3.8.3 flash with NefMoto?? Post by: tabster on March 03, 2015, 09:48:45 AM The only commercial tools that support it are MPPS and FRC SPI as far as I know.
Title: Re: AW: M3.8.3 flash with NefMoto?? Post by: rrdiag on March 03, 2015, 10:07:14 AM Also i habe to desolder the chip??
Title: Re: M3.8.3 flash with NefMoto?? Post by: tabster on March 03, 2015, 10:13:31 AM Yes you can desolder the chip also, it just a normal PSOP44.
Or if you use either of the flash tools in the above post you can write from OBD (but not read) Title: Re: AW: M3.8.3 flash with NefMoto?? Post by: rrdiag on March 03, 2015, 10:16:34 AM Ok... understood... then i have to solder.
Thx for the fast info ;-) Title: Re: M3.8.3 flash with NefMoto?? Post by: aef on March 03, 2015, 10:43:52 AM No need to desolder if you would like to write to it. mpps will do it.
Title: Re: AW: M3.8.3 flash with NefMoto?? Post by: rrdiag on March 03, 2015, 12:09:03 PM But i have no mpps... my mpps v16 which i sold 2 weeks ago, had only me7.xx in menü... it will programm via me7. Or what?? Then it dont do kess?? This is what i dont understand... has anyone try it??
Title: Re: AW: M3.8.3 flash with NefMoto?? Post by: rrdiag on March 03, 2015, 12:10:48 PM I only habe to desolder the 29f200/400 chip or another too??
Title: Re: M3.8.3 flash with NefMoto?? Post by: aef on March 03, 2015, 02:08:40 PM Its a bit tricky :)
1.8t Turbo M5.92 from the Menu Title: Re: M3.8.3 flash with NefMoto?? Post by: osmipotnik on March 28, 2015, 06:49:28 AM http://www.bolha.com/avto-moto/tuning/povecanje-moci/cip-tuning/ecu-motorni-racunalnik-golf-4-gti-1292761898.html
|