|
Title: Can't flashing in the car ! (Bench flashing is fine) Post by: AndrewS on March 12, 2015, 08:37:42 PM Hi
I'm remaping my TT 180. I installed bigger turbine(td05-14g), intercooler and custom induction/downpipe. I can correct checksum and bench flashing.!so I started MLHFM correction to adjust MAF scale for induction kit. (I'm using stock MAF housing but I installed custom induction kit/fillter.) I increased MLHFM 15% but my WBO2 show to lean.(15~16) I think I should try this manytimes but Reinstall ECU is too hard. I'm using Galletto for flashing but I couldn't go bootmode in the car. anybody can flashing in the car? Please tell me how to flashing in the car. Title: Re: Can't flashing in the car ! (Bench flashing is fine) Post by: jogtx16v on March 13, 2015, 07:58:18 AM you can try via obd kwp mode with nefmoto software : http://www.nefariousmotorsports.com/wiki/index.php/NefMoto_ECU_Flashing_Software
this software have also bootmode but do not take this.. not working in nef software. You can read/flash in car with nef without boot mode. also don't try read with nef if you have a commercial tune in car. last version of the software are here : http://nefariousmotorsports.com/forum/index.php?topic=2200.0 good luck ! Title: Re: Can't flashing in the car ! (Bench flashing is fine) Post by: AndrewS on March 15, 2015, 06:39:06 PM Thank you! :D
|