NefMoto

i followed complete guide yet i'm still having problems logging. heres the cmd screen.
-> Reading log config file C:\Users\ktmfa_000\Desktop\ME7Logger_DIST_10072013_v1
.20\logs\injwin_template.cfg .... done
-> Reading ecu characteristics file C:\Users\ktmfa_000\Desktop\ME7Logger_DIST_10
072013_v1.20\ecus\injwin.ecu .... done
Used Ecu definition is:
[Communication]
Connect      = SLOW-0x01
Communicate  = HM0
LogSpeed     = 56000

[Identification]
HWNumber           = "0261206878"
SWNumber           = "1037363670"
PartNumber         = "8E0909518F"
SWVersion          = "0003"
EngineId           = "1.8L R4/5VT"

Logged variables are:
#no.: name                , alias                           , addr  ,sz, bitm, S
, I,  A         ,   B, unit
#-------------------------------------------------------------------------------
-----------------------------
#001: dwkrz_0             , IgnitionRetardCyl1              , 380A9B, 1, 0000, 1
, 0,        0.75,   0, '░KW'
#002: dwkrz_1             , IgnitionRetardCyl4              , 380A9C, 1, 0000, 1
, 0,        0.75,   0, '░KW'
#003: dwkrz_2             , IgnitionRetardCyl2              , 380A9D, 1, 0000, 1
, 0,        0.75,   0, '░KW'
#004: dwkrz_3             , IgnitionRetardCyl3              , 380A9E, 1, 0000, 1
, 0,        0.75,   0, '░KW'
#005: etazwbm             , EtaIgnitionAngleAvg             , 380B14, 1, 0000, 0
, 0,         0.5,   0, '%'
#006: lamsbg_w            , AirFuelRatioDesired             , 3821A8, 2, 0000, 0
, 0, 0.000244141,   0, '-'
#007: lamsoni_w           , AirFuelRatioCurrent             , 381BEA, 2, 0000, 0
, 0, 0.000244141,   0, '-'
#008: ldtvm               , WastegateDutyCycle              , 380ADD, 1, 0000, 0
, 0,    0.390625,   0, '%'
#009: mshfm_w             , MassAirFlow                     , 00F9A6, 2, 0000, 0
, 0,   0.0277778,   0, 'g/s'
#010: nmot                , EngineSpeed                     , 00F89C, 1, 0000, 0
, 0,          40,   0, 'rpm'
#011: plsol               , BoostPressureDesired            , 380A16, 1, 0000, 0
, 0,          10,   0, 'mbar'
#012: pvdkds_w            , BoostPressureActual             , 38203C, 2, 0000, 0
, 0,   0.0390625,   0, 'mbar'
#013: tans                , IntakeAirTemperature            , 380A51, 1, 0000, 0
, 0,        0.75,  48, '░C'
#014: zwist               , IgnitionTimingAngle             , 00FA20, 1, 0000, 1
, 0,        0.75,   0, '░KW'
Logged data size is 18 bytes.
Really logged are 12 entries with 18 bytes.
Start connecting to ECU at 28.03.2015 17:04:13.835
try connect slow(01)
=> FLASH (slowinit)
ecuid reports software version
=> success
Started session86, speed=56000
Got error -8
-> Read ECU ID's ..Got error -8
.. failed
=> Logging failed
exiting (cause=0x4)...

C:\Users\ktmfa_000\Desktop\ME7Logger_DIST_10072013_v1.20>

Lower your speed. Try 19200 baud (done in the .ecu file).

Woohoo i can finally log!!