NefMoto

Technical => Reverse Engineering => Topic started by: MadCow on March 29, 2015, 03:42:15 PM



Title: B5 A4 cluster temp gauge linearization
Post by: MadCow on March 29, 2015, 03:42:15 PM
I recently found out about MK4 R32 owners modifying their cluster EEPROM to have a linear temp gauge response curve rather than the stepped curve that holds it in the middle through the range of normal operating temperatures. I tried to do that with my cluster but I can't find anything in my EEPROM that looks remotely close to what I'm looking for. Is this even possible with a B5 cluster or am I not looking hard enough?


Title: Re: B5 A4 cluster temp gauge linearization
Post by: k0mpresd on March 29, 2015, 06:55:23 PM
i did this a looong time ago. i may still have the modified e2p file somewhere. ill take a look.


Title: Re: B5 A4 cluster temp gauge linearization
Post by: keithwbloom on March 30, 2015, 02:46:55 PM
There's a write up on this on ClubTDI forums.